delta/git.git/t, branch jk/diff-submodule-diff-inline

diff: recurse into nested submodules for inline diff

2017-05-08T00:44:54+00:00

When fd47ae6a5b (diff: teach diff to display submodule difference with an
inline diff, 2016-08-31) was introduced, we did not think of recursing
into nested submodules.

When showing the inline diff for submodules, automatically recurse
into nested submodules as well with inline submodule diffs.

Signed-off-by: Stefan Beller 
Acked-by: Jacob Keller 
Signed-off-by: Junio C Hamano

rev-list: use hdr_termination instead of a always using a newline

2016-10-20T21:44:37+00:00

When adding support for prefixing output of log and other commands using
--line-prefix, commit 660e113ce118 ("graph: add support for
--line-prefix on all graph-aware output", 2016-08-31) accidentally
broke rev-list --header output.

In order to make the output appear with a line-prefix, the flow was
changed to always use the graph subsystem for display. Unfortunately
the graph flow in rev-list did not use info->hdr_termination as it was
assumed that graph output would never need to putput NULs.

Since we now always use the graph code in order to handle the case of
line-prefix, simply replace putchar('\n') with
putchar(info->hdr_termination) which will correct this issue.

Add a test for the --header case to make sure we don't break it in the
future.

Reported-by: Dennis Kaarsemaker 
Signed-off-by: Jacob Keller 
Signed-off-by: Junio C Hamano 
Signed-off-by: Jacob Keller 
Signed-off-by: Junio C Hamano

diff: teach diff to display submodule difference with an inline diff

2016-09-01T01:07:10+00:00

Teach git-diff and friends a new format for displaying the difference
of a submodule. The new format is an inline diff of the contents of the
submodule between the commit range of the update. This allows the user
to see the actual code change caused by a submodule update.

Add tests for the new format and option.

Signed-off-by: Jacob Keller 
Signed-off-by: Junio C Hamano

allow do_submodule_path to work even if submodule isn't checked out

2016-09-01T01:07:10+00:00

Currently, do_submodule_path will attempt locating the .git directory by
using read_gitfile on /.git. If this fails it just assumes the
/.git is actually a git directory.

This is good because it allows for handling submodules which were cloned
in a regular manner first before being added to the superproject.

Unfortunately this fails if the  is not actually checked out any
longer, such as by removing the directory.

Fix this by checking if the directory we found is actually a gitdir. In
the case it is not, attempt to lookup the submodule configuration and
find the name of where it is stored in the .git/modules/ directory of
the superproject.

If we can't locate the submodule configuration, this might occur because
for example a submodule gitlink was added but the corresponding
.gitmodules file was not properly updated.  A die() here would not be
pleasant to the users of submodule diff formats, so instead, modify
do_submodule_path() to return an error code:

 - git_pathdup_submodule() returns NULL when we fail to find a path.
 - strbuf_git_path_submodule() propagates the error code to the caller.

Modify the callers of these functions to check the error code and fail
properly. This ensures we don't attempt to use a bad path that doesn't
match the corresponding submodule.

Because this change fixes add_submodule_odb() to work even if the
submodule is not checked out, update the wording of the submodule log
diff format to correctly display that the submodule is "not initialized"
instead of "not checked out"

Add tests to ensure this change works as expected.

Signed-off-by: Jacob Keller 
Signed-off-by: Junio C Hamano

graph: add support for --line-prefix on all graph-aware output

2016-09-01T01:07:09+00:00

Add an extension to git-diff and git-log (and any other graph-aware
displayable output) such that "--line-prefix=" will print the
additional line-prefix on every line of output.

To make this work, we have to fix a few bugs in the graph API that force
graph_show_commit_msg to be used only when you have a valid graph.
Additionally, we extend the default_diff_output_prefix handler to work
even when no graph is enabled.

This is somewhat of a hack on top of the graph API, but I think it
should be acceptable here.

This will be used by a future extension of submodule display which
displays the submodule diff as the actual diff between the pre and post
commit in the submodule project.

Add some tests for both git-log and git-diff to ensure that the prefix
is honored correctly.

Signed-off-by: Jacob Keller 
Signed-off-by: Junio C Hamano

Merge branch 'sb/submodule-update-dot-branch'

2016-08-10T19:33:20+00:00

A few updates to "git submodule update".

Use of "| wc -l" break with BSD variant of 'wc'.

* sb/submodule-update-dot-branch:
  t7406: fix breakage on OSX
  submodule update: allow '.' for branch value
  submodule--helper: add remote-branch helper
  submodule-config: keep configured branch around
  submodule--helper: fix usage string for relative-path
  submodule update: narrow scope of local variable
  submodule update: respect depth in subsequent fetches
  t7406: future proof tests with hard coded depth

Merge branch 'js/am-3-merge-recursive-direct'

2016-08-10T19:33:20+00:00

"git am -3" calls "git merge-recursive" when it needs to fall back
to a three-way merge; this call has been turned into an internal
subroutine call instead of spawning a separate subprocess.

* js/am-3-merge-recursive-direct:
  merge-recursive: flush output buffer even when erroring out
  merge_trees(): ensure that the callers release output buffer
  merge-recursive: offer an option to retain the output in 'obuf'
  merge-recursive: write the commit title in one go
  merge-recursive: flush output buffer before printing error messages
  am -3: use merge_recursive() directly again
  merge-recursive: switch to returning errors instead of dying
  merge-recursive: handle return values indicating errors
  merge-recursive: allow write_tree_from_memory() to error out
  merge-recursive: avoid returning a wholesale struct
  merge_recursive: abort properly upon errors
  prepare the builtins for a libified merge_recursive()
  merge-recursive: clarify code in was_tracked()
  die(_("BUG")): avoid translating bug messages
  die("bug"): report bugs consistently
  t5520: verify that `pull --rebase` shows the helpful advice when failing

Merge branch 'jt/format-patch-from-config'

2016-08-10T19:33:18+00:00

"git format-patch" learned format.from configuration variable to
specify the default settings for its "--from" option.

* jt/format-patch-from-config:
  format-patch: format.from gives the default for --from

Merge branch 'jk/push-force-with-lease-creation'

2016-08-10T19:33:18+00:00

"git push --force-with-lease" already had enough logic to allow
ensuring that such a push results in creation of a ref (i.e. the
receiving end did not have another push from sideways that would be
discarded by our force-pushing), but didn't expose this possibility
to the users.  It does so now.

* jk/push-force-with-lease-creation:
  t5533: make it pass on case-sensitive filesystems
  push: allow pushing new branches with --force-with-lease
  push: add shorthand for --force-with-lease branch creation
  Documentation/git-push: fix placeholder formatting

t7406: fix breakage on OSX

2016-08-10T18:27:22+00:00

On OSX `wc` prefixes the output of numbers with whitespace, such
that the `commit_count` would be "SP ". When using that in

    git submodule update --init --depth=$commit_count

the depth would be empty and the number is interpreted as the
pathspec.  Fix this by not using `wc` and rather instruct rev-list
to count.

Another way to fix this is to remove the `=` sign after the
`--depth` argument as then we are allowed to have more than just one
whitespace between `--depth` and the actual number.  Prefer the
solution of rev-list counting as that is expected to be slightly
faster and more self-contained within Git.

Reported-by: Lars Schneider 
Helped-by: Junio C Hamano ,
Signed-off-by: Stefan Beller 
Signed-off-by: Junio C Hamano