-Added PCRE library source

-Updated configuration process

1 files changed, 439 insertions, 0 deletions

diff --git a/ext/pcre/pcrelib/ChangeLog b/ext/pcre/pcrelib/ChangeLog
new file mode 100644
index 0000000000..2259f873ef
--- /dev/null
+++ b/ext/pcre/pcrelib/ChangeLog
@@ -0,0 +1,439 @@
+ChangeLog for PCRE
+------------------
+
+
+Version 2.05 21-Apr-99
+----------------------
+
+1. Changed the type of magic_number from int to long int so that it works
+properly on 16-bit systems.
+
+2. Fixed a bug which caused patterns starting with .* not to work correctly
+when the subject string contained newline characters. PCRE was assuming
+anchoring for such patterns in all cases, which is not correct because .* will
+not pass a newline unless PCRE_DOTALL is set. It now assumes anchoring only if
+DOTALL is set at top level; otherwise it knows that patterns starting with .*
+must be retried after every newline in the subject.
+
+
+Version 2.04 18-Feb-99
+----------------------
+
+1. For parenthesized subpatterns with repeats whose minimum was zero, the
+computation of the store needed to hold the pattern was incorrect (too large).
+If such patterns were nested a few deep, this could multiply and become a real
+problem.
+
+2. Added /M option to pcretest to show the memory requirement of a specific
+pattern. Made -m a synonym of -s (which does this globally) for compatibility.
+
+3. Subpatterns of the form (regex){n,m} (i.e. limited maximum) were being
+compiled in such a way that the backtracking after subsequent failure was
+pessimal. Something like (a){0,3} was compiled as (a)?(a)?(a)? instead of
+((a)((a)(a)?)?)? with disastrous performance if the maximum was of any size.
+
+
+Version 2.03 02-Feb-99
+----------------------
+
+1. Fixed typo and small mistake in man page.
+
+2. Added 4th condition (GPL supersedes if conflict) and created separate
+LICENCE file containing the conditions.
+
+3. Updated pcretest so that patterns such as /abc\/def/ work like they do in
+Perl, that is the internal \ allows the delimiter to be included in the
+pattern. Locked out the use of \ as a delimiter. If \ immediately follows
+the final delimiter, add \ to the end of the pattern (to test the error).
+
+4. Added the convenience functions for extracting substrings after a successful
+match. Updated pcretest to make it able to test these functions.
+
+
+Version 2.02 14-Jan-99
+----------------------
+
+1. Initialized the working variables associated with each extraction so that
+their saving and restoring doesn't refer to uninitialized store.
+
+2. Put dummy code into study.c in order to trick the optimizer of the IBM C
+compiler for OS/2 into generating correct code. Apparently IBM isn't going to
+fix the problem.
+
+3. Pcretest: the timing code wasn't using LOOPREPEAT for timing execution
+calls, and wasn't printing the correct value for compiling calls. Increased the
+default value of LOOPREPEAT, and the number of significant figures in the
+times.
+
+4. Changed "/bin/rm" in the Makefile to "-rm" so it works on Windows NT.
+
+5. Renamed "deftables" as "dftables" to get it down to 8 characters, to avoid
+a building problem on Windows NT with a FAT file system.
+
+
+Version 2.01 21-Oct-98
+----------------------
+
+1. Changed the API for pcre_compile() to allow for the provision of a pointer
+to character tables built by pcre_maketables() in the current locale. If NULL
+is passed, the default tables are used.
+
+
+Version 2.00 24-Sep-98
+----------------------
+
+1. Since the (>?) facility is in Perl 5.005, don't require PCRE_EXTRA to enable
+it any more.
+
+2. Allow quantification of (?>) groups, and make it work correctly.
+
+3. The first character computation wasn't working for (?>) groups.
+
+4. Correct the implementation of \Z (it is permitted to match on the \n at the
+end of the subject) and add 5.005's \z, which really does match only at the
+very end of the subject.
+
+5. Remove the \X "cut" facility; Perl doesn't have it, and (?> is neater.
+
+6. Remove the ability to specify CASELESS, MULTILINE, DOTALL, and
+DOLLAR_END_ONLY at runtime, to make it possible to implement the Perl 5.005
+localized options. All options to pcre_study() were also removed.
+
+7. Add other new features from 5.005:
+
+   $(?<=           positive lookbehind
+   $(?<!           negative lookbehind
+   (?imsx-imsx)    added the unsetting capability
+                   such a setting is global if at outer level; local otherwise
+   (?imsx-imsx:)   non-capturing groups with option setting
+   (?(cond)re|re)  conditional pattern matching
+
+   A backreference to itself in a repeated group matches the previous
+   captured string.
+
+8. General tidying up of studying (both automatic and via "study")
+consequential on the addition of new assertions.
+
+9. As in 5.005, unlimited repeated groups that could match an empty substring
+are no longer faulted at compile time. Instead, the loop is forcibly broken at
+runtime if any iteration does actually match an empty substring.
+
+10. Include the RunTest script in the distribution.
+
+11. Added tests from the Perl 5.005_02 distribution. This showed up a few
+discrepancies, some of which were old and were also with respect to 5.004. They
+have now been fixed.
+
+
+Version 1.09 28-Apr-98
+----------------------
+
+1. A negated single character class followed by a quantifier with a minimum
+value of one (e.g.  [^x]{1,6}  ) was not compiled correctly. This could lead to
+program crashes, or just wrong answers. This did not apply to negated classes
+containing more than one character, or to minima other than one.
+
+
+Version 1.08 27-Mar-98
+----------------------
+
+1. Add PCRE_UNGREEDY to invert the greediness of quantifiers.
+
+2. Add (?U) and (?X) to set PCRE_UNGREEDY and PCRE_EXTRA respectively. The
+latter must appear before anything that relies on it in the pattern.
+
+
+Version 1.07 16-Feb-98
+----------------------
+
+1. A pattern such as /((a)*)*/ was not being diagnosed as in error (unlimited
+repeat of a potentially empty string).
+
+
+Version 1.06 23-Jan-98
+----------------------
+
+1. Added Markus Oberhumer's little patches for C++.
+
+2. Literal strings longer than 255 characters were broken.
+
+
+Version 1.05 23-Dec-97
+----------------------
+
+1. Negated character classes containing more than one character were failing if
+PCRE_CASELESS was set at run time.
+
+
+Version 1.04 19-Dec-97
+----------------------
+
+1. Corrected the man page, where some "const" qualifiers had been omitted.
+
+2. Made debugging output print "{0,xxx}" instead of just "{,xxx}" to agree with
+input syntax.
+
+3. Fixed memory leak which occurred when a regex with back references was
+matched with an offsets vector that wasn't big enough. The temporary memory
+that is used in this case wasn't being freed if the match failed.
+
+4. Tidied pcretest to ensure it frees memory that it gets.
+
+5. Temporary memory was being obtained in the case where the passed offsets
+vector was exactly big enough.
+
+6. Corrected definition of offsetof() from change 5 below.
+
+7. I had screwed up change 6 below and broken the rules for the use of
+setjmp(). Now fixed.
+
+
+Version 1.03 18-Dec-97
+----------------------
+
+1. A erroneous regex with a missing opening parenthesis was correctly
+diagnosed, but PCRE attempted to access brastack[-1], which could cause crashes
+on some systems.
+
+2. Replaced offsetof(real_pcre, code) by offsetof(real_pcre, code[0]) because
+it was reported that one broken compiler failed on the former because "code" is
+also an independent variable.
+
+3. The erroneous regex a[]b caused an array overrun reference.
+
+4. A regex ending with a one-character negative class (e.g. /[^k]$/) did not
+fail on data ending with that character. (It was going on too far, and checking
+the next character, typically a binary zero.) This was specific to the
+optimized code for single-character negative classes.
+
+5. Added a contributed patch from the TIN world which does the following:
+
+  + Add an undef for memmove, in case the the system defines a macro for it.
+
+  + Add a definition of offsetof(), in case there isn't one. (I don't know
+    the reason behind this - offsetof() is part of the ANSI standard - but
+    it does no harm).
+
+  + Reduce the ifdef's in pcre.c using macro DPRINTF, thereby eliminating
+    most of the places where whitespace preceded '#'. I have given up and
+    allowed the remaining 2 cases to be at the margin.
+
+  + Rename some variables in pcre to eliminate shadowing. This seems very
+    pedantic, but does no harm, of course.
+
+6. Moved the call to setjmp() into its own function, to get rid of warnings
+from gcc -Wall, and avoided calling it at all unless PCRE_EXTRA is used.
+
+7. Constructs such as \d{8,} were compiling into the equivalent of
+\d{8}\d{0,65527} instead of \d{8}\d* which didn't make much difference to the
+outcome, but in this particular case used more store than had been allocated,
+which caused the bug to be discovered because it threw up an internal error.
+
+8. The debugging code in both pcre and pcretest for outputting the compiled
+form of a regex was going wrong in the case of back references followed by
+curly-bracketed repeats.
+
+
+Version 1.02 12-Dec-97
+----------------------
+
+1. Typos in pcre.3 and comments in the source fixed.
+
+2. Applied a contributed patch to get rid of places where it used to remove
+'const' from variables, and fixed some signed/unsigned and uninitialized
+variable warnings.
+
+3. Added the "runtest" target to Makefile.
+
+4. Set default compiler flag to -O2 rather than just -O.
+
+
+Version 1.01 19-Nov-97
+----------------------
+
+1. PCRE was failing to diagnose unlimited repeat of empty string for patterns
+like /([ab]*)*/, that is, for classes with more than one character in them.
+
+2. Likewise, it wasn't diagnosing patterns with "once-only" subpatterns, such
+as /((?>a*))*/ (a PCRE_EXTRA facility).
+
+
+Version 1.00 18-Nov-97
+----------------------
+
+1. Added compile-time macros to support systems such as SunOS4 which don't have
+memmove() or strerror() but have other things that can be used instead.
+
+2. Arranged that "make clean" removes the executables.
+
+
+Version 0.99 27-Oct-97
+----------------------
+
+1. Fixed bug in code for optimizing classes with only one character. It was
+initializing a 32-byte map regardless, which could cause it to run off the end
+of the memory it had got.
+
+2. Added, conditional on PCRE_EXTRA, the proposed (?>REGEX) construction.
+
+
+Version 0.98 22-Oct-97
+----------------------
+
+1. Fixed bug in code for handling temporary memory usage when there are more
+back references than supplied space in the ovector. This could cause segfaults.
+
+
+Version 0.97 21-Oct-97
+----------------------
+
+1. Added the \X "cut" facility, conditional on PCRE_EXTRA.
+
+2. Optimized negated single characters not to use a bit map.
+
+3. Brought error texts together as macro definitions; clarified some of them;
+fixed one that was wrong - it said "range out of order" when it meant "invalid
+escape sequence".
+
+4. Changed some char * arguments to const char *.
+
+5. Added PCRE_NOTBOL and PCRE_NOTEOL (from POSIX).
+
+6. Added the POSIX-style API wrapper in pcreposix.a and testing facilities in
+pcretest.
+
+
+Version 0.96 16-Oct-97
+----------------------
+
+1. Added a simple "pgrep" utility to the distribution.
+
+2. Fixed an incompatibility with Perl: "{" is now treated as a normal character
+unless it appears in one of the precise forms "{ddd}", "{ddd,}", or "{ddd,ddd}"
+where "ddd" means "one or more decimal digits".
+
+3. Fixed serious bug. If a pattern had a back reference, but the call to
+pcre_exec() didn't supply a large enough ovector to record the related
+identifying subpattern, the match always failed. PCRE now remembers the number
+of the largest back reference, and gets some temporary memory in which to save
+the offsets during matching if necessary, in order to ensure that
+backreferences always work.
+
+4. Increased the compatibility with Perl in a number of ways:
+
+  (a) . no longer matches \n by default; an option PCRE_DOTALL is provided
+      to request this handling. The option can be set at compile or exec time.
+
+  (b) $ matches before a terminating newline by default; an option
+      PCRE_DOLLAR_ENDONLY is provided to override this (but not in multiline
+      mode). The option can be set at compile or exec time.
+
+  (c) The handling of \ followed by a digit other than 0 is now supposed to be
+      the same as Perl's. If the decimal number it represents is less than 10
+      or there aren't that many previous left capturing parentheses, an octal
+      escape is read. Inside a character class, it's always an octal escape,
+      even if it is a single digit.
+
+  (d) An escaped but undefined alphabetic character is taken as a literal,
+      unless PCRE_EXTRA is set. Currently this just reserves the remaining
+      escapes.
+
+  (e) {0} is now permitted. (The previous item is removed from the compiled
+      pattern).
+
+5. Changed all the names of code files so that the basic parts are no longer
+than 10 characters, and abolished the teeny "globals.c" file.
+
+6. Changed the handling of character classes; they are now done with a 32-byte
+bit map always.
+
+7. Added the -d and /D options to pcretest to make it possible to look at the
+internals of compilation without having to recompile pcre.
+
+
+Version 0.95 23-Sep-97
+----------------------
+
+1. Fixed bug in pre-pass concerning escaped "normal" characters such as \x5c or
+\x20 at the start of a run of normal characters. These were being treated as
+real characters, instead of the source characters being re-checked.
+
+
+Version 0.94 18-Sep-97
+----------------------
+
+1. The functions are now thread-safe, with the caveat that the global variables
+containing pointers to malloc() and free() or alternative functions are the
+same for all threads.
+
+2. Get pcre_study() to generate a bitmap of initial characters for non-
+anchored patterns when this is possible, and use it if passed to pcre_exec().
+
+
+Version 0.93 15-Sep-97
+----------------------
+
+1. /(b)|(:+)/ was computing an incorrect first character.
+
+2. Add pcre_study() to the API and the passing of pcre_extra to pcre_exec(),
+but not actually doing anything yet.
+
+3. Treat "-" characters in classes that cannot be part of ranges as literals,
+as Perl does (e.g. [-az] or [az-]).
+
+4. Set the anchored flag if a branch starts with .* or .*? because that tests
+all possible positions.
+
+5. Split up into different modules to avoid including unneeded functions in a
+compiled binary. However, compile and exec are still in one module. The "study"
+function is split off.
+
+6. The character tables are now in a separate module whose source is generated
+by an auxiliary program - but can then be edited by hand if required. There are
+now no calls to isalnum(), isspace(), isdigit(), isxdigit(), tolower() or
+toupper() in the code.
+
+7. Turn the malloc/free funtions variables into pcre_malloc and pcre_free and
+make them global. Abolish the function for setting them, as the caller can now
+set them directly.
+
+
+Version 0.92 11-Sep-97
+----------------------
+
+1. A repeat with a fixed maximum and a minimum of 1 for an ordinary character
+(e.g. /a{1,3}/) was broken (I mis-optimized it).
+
+2. Caseless matching was not working in character classes if the characters in
+the pattern were in upper case.
+
+3. Make ranges like [W-c] work in the same way as Perl for caseless matching.
+
+4. Make PCRE_ANCHORED public and accept as a compile option.
+
+5. Add an options word to pcre_exec() and accept PCRE_ANCHORED and
+PCRE_CASELESS at run time. Add escapes \A and \I to pcretest to cause it to
+pass them.
+
+6. Give an error if bad option bits passed at compile or run time.
+
+7. Add PCRE_MULTILINE at compile and exec time, and (?m) as well. Add \M to
+pcretest to cause it to pass that flag.
+
+8. Add pcre_info(), to get the number of identifying subpatterns, the stored
+options, and the first character, if set.
+
+9. Recognize C+ or C{n,m} where n >= 1 as providing a fixed starting character.
+
+
+Version 0.91 10-Sep-97
+----------------------
+
+1. PCRE was failing to diagnose unlimited repeats of subpatterns that could
+match the empty string as in /(a*)*/. It was looping and ultimately crashing.
+
+2. PCRE was looping on encountering an indefinitely repeated back reference to
+a subpattern that had matched an empty string, e.g. /(a|)\1*/. It now does what
+Perl does - treats the match as successful.
+
+****