From d1ce69cfe841cc94a81001df4f9ead533114ba0c Mon Sep 17 00:00:00 2001 From: Ned Batchelder Date: Fri, 28 Dec 2012 07:15:48 -0500 Subject: Change this file to unix line endings. --- doc/conf.py | 432 ++++++++++++++++++++++++++++++------------------------------ 1 file changed, 216 insertions(+), 216 deletions(-) (limited to 'doc/conf.py') diff --git a/doc/conf.py b/doc/conf.py index 68c923b..a7f67a0 100644 --- a/doc/conf.py +++ b/doc/conf.py @@ -1,216 +1,216 @@ -# -*- coding: utf-8 -*- -# -# coverage.py documentation build configuration file, created by -# sphinx-quickstart on Wed May 13 22:18:33 2009. -# -# This file is execfile()d with the current directory set to its containing dir. -# -# Note that not all possible configuration values are present in this -# autogenerated file. -# -# All configuration values have a default; values that are commented out -# serve to show the default. - -import sys, os - -# If extensions (or modules to document with autodoc) are in another directory, -# add these directories to sys.path here. If the directory is relative to the -# documentation root, use os.path.abspath to make it absolute, like shown here. -#sys.path.append(os.path.abspath('.')) -# Copied from django docs: -sys.path.append(os.path.join(os.path.dirname(__file__), "_ext")) - -# -- General configuration ----------------------------------------------------- - -# Add any Sphinx extension module names here, as strings. They can be extensions -# coming with Sphinx (named 'sphinx.ext.*') or your custom ones. -extensions = ['sphinx.ext.autodoc', 'sphinx.ext.todo', 'sphinx.ext.ifconfig', 'px_xlator'] - -# Add any paths that contain templates here, relative to this directory. -templates_path = ['_templates'] - -# The suffix of source filenames. -source_suffix = '.rst' - -# The encoding of source files. -#source_encoding = 'utf-8' - -# The master toctree document. -master_doc = 'index' - -# General information about the project. -project = u'coverage.py' -copyright = u'2009-2012, Ned Batchelder' - -# The version info for the project you're documenting, acts as replacement for -# |version| and |release|, also used in various other places throughout the -# built documents. -# -# The short X.Y version. -version = '3.6' -# The full version, including alpha/beta/rc tags. -release = '3.6b3' - -# The language for content autogenerated by Sphinx. Refer to documentation -# for a list of supported languages. -#language = None - -# There are two options for replacing |today|: either, you set today to some -# non-false value, then it is used: -#today = '' -# Else, today_fmt is used as the format for a strftime call. -#today_fmt = '%B %d, %Y' - -# List of documents that shouldn't be included in the build. -#unused_docs = [] - -# List of directories, relative to source directory, that shouldn't be searched -# for source files. -exclude_trees = ['_build'] - -# The reST default role (used for this markup: `text`) to use for all documents. -#default_role = None - -# If true, '()' will be appended to :func: etc. cross-reference text. -#add_function_parentheses = True - -# If true, the current module name will be prepended to all description -# unit titles (such as .. function::). -#add_module_names = True - -# If true, sectionauthor and moduleauthor directives will be shown in the -# output. They are ignored by default. -#show_authors = False - -# The name of the Pygments (syntax highlighting) style to use. -pygments_style = 'sphinx' - -# A list of ignored prefixes for module index sorting. -#modindex_common_prefix = [] - -# -- Options for HTML output --------------------------------------------------- - -#html_translator_class = "px_xlator.PxTranslator" - -# The theme to use for HTML and HTML Help pages. Major themes that come with -# Sphinx are currently 'default' and 'sphinxdoc'. -html_theme = 'default' - -# Theme options are theme-specific and customize the look and feel of a theme -# further. For a list of options available for each theme, see the -# documentation. -#html_theme_options = {} - -html_style = "neds.css" - -html_add_permalinks = False - -# Add any paths that contain custom themes here, relative to this directory. -html_theme_path = ['_templates'] - -# The name for this set of Sphinx documents. If None, it defaults to -# " v documentation". -#html_title = None - -# A shorter title for the navigation bar. Default is the same as html_title. -#html_short_title = None - -# The name of an image file (relative to this directory) to place at the top -# of the sidebar. -#html_logo = None - -# The name of an image file (within the static path) to use as favicon of the -# docs. This file should be a Windows icon file (.ico) being 16x16 or 32x32 -# pixels large. -#html_favicon = None - -# Add any paths that contain custom static files (such as style sheets) here, -# relative to this directory. They are copied after the builtin static files, -# so a file named "default.css" will overwrite the builtin "default.css". -html_static_path = ['_static'] - -# If not '', a 'Last updated on:' timestamp is inserted at every page bottom, -# using the given strftime format. -#html_last_updated_fmt = '%b %d, %Y' - -# If true, SmartyPants will be used to convert quotes and dashes to -# typographically correct entities. -html_use_smartypants = True - -# Custom sidebar templates, maps document names to template names. -#html_sidebars = {} - -# Additional templates that should be rendered to pages, maps page names to -# template names. -#html_additional_pages = {} - -# If false, no module index is generated. -html_use_modindex = False - -# If false, no index is generated. -html_use_index = False - -# If true, the index is split into individual pages for each letter. -#html_split_index = False - -# If true, links to the reST sources are added to the pages. -html_show_sourcelink = False - -# If true, an OpenSearch description file will be output, and all pages will -# contain a tag referring to it. The value of this option must be the -# base URL from which the finished HTML is served. -#html_use_opensearch = '' - -# If nonempty, this is the file name suffix for HTML files (e.g. ".xhtml"). -#html_file_suffix = '.px' - -# Output file base name for HTML help builder. -htmlhelp_basename = 'coveragepydoc' - - -# -- Options for LaTeX output -------------------------------------------------- - -# The paper size ('letter' or 'a4'). -#latex_paper_size = 'letter' - -# The font size ('10pt', '11pt' or '12pt'). -#latex_font_size = '10pt' - -# Grouping the document tree into LaTeX files. List of tuples -# (source start file, target name, title, author, documentclass [howto/manual]). -latex_documents = [ - ('index', 'coveragepy.tex', u'coverage.py Documentation', - u'Ned Batchelder', 'manual'), -] - -# The name of an image file (relative to this directory) to place at the top of -# the title page. -#latex_logo = None - -# For "manual" documents, if this is true, then toplevel headings are parts, -# not chapters. -#latex_use_parts = False - -# Additional stuff for the LaTeX preamble. -#latex_preamble = '' - -# Documents to append as an appendix to all manuals. -#latex_appendices = [] - -# If false, no module index is generated. -#latex_use_modindex = True - - -# When auto-doc'ing a class, write the class' docstring and the __init__ docstring -# into the class docs. -autoclass_content = "both" - - - - - -prerelease = bool(max(release).isalpha()) - -def setup(app): - app.add_config_value('prerelease', False, 'env') - print "** Prerelease = %r" % prerelease +# -*- coding: utf-8 -*- +# +# coverage.py documentation build configuration file, created by +# sphinx-quickstart on Wed May 13 22:18:33 2009. +# +# This file is execfile()d with the current directory set to its containing dir. +# +# Note that not all possible configuration values are present in this +# autogenerated file. +# +# All configuration values have a default; values that are commented out +# serve to show the default. + +import sys, os + +# If extensions (or modules to document with autodoc) are in another directory, +# add these directories to sys.path here. If the directory is relative to the +# documentation root, use os.path.abspath to make it absolute, like shown here. +#sys.path.append(os.path.abspath('.')) +# Copied from django docs: +sys.path.append(os.path.join(os.path.dirname(__file__), "_ext")) + +# -- General configuration ----------------------------------------------------- + +# Add any Sphinx extension module names here, as strings. They can be extensions +# coming with Sphinx (named 'sphinx.ext.*') or your custom ones. +extensions = ['sphinx.ext.autodoc', 'sphinx.ext.todo', 'sphinx.ext.ifconfig', 'px_xlator'] + +# Add any paths that contain templates here, relative to this directory. +templates_path = ['_templates'] + +# The suffix of source filenames. +source_suffix = '.rst' + +# The encoding of source files. +#source_encoding = 'utf-8' + +# The master toctree document. +master_doc = 'index' + +# General information about the project. +project = u'coverage.py' +copyright = u'2009-2012, Ned Batchelder' + +# The version info for the project you're documenting, acts as replacement for +# |version| and |release|, also used in various other places throughout the +# built documents. +# +# The short X.Y version. +version = '3.6' +# The full version, including alpha/beta/rc tags. +release = '3.6b3' + +# The language for content autogenerated by Sphinx. Refer to documentation +# for a list of supported languages. +#language = None + +# There are two options for replacing |today|: either, you set today to some +# non-false value, then it is used: +#today = '' +# Else, today_fmt is used as the format for a strftime call. +#today_fmt = '%B %d, %Y' + +# List of documents that shouldn't be included in the build. +#unused_docs = [] + +# List of directories, relative to source directory, that shouldn't be searched +# for source files. +exclude_trees = ['_build'] + +# The reST default role (used for this markup: `text`) to use for all documents. +#default_role = None + +# If true, '()' will be appended to :func: etc. cross-reference text. +#add_function_parentheses = True + +# If true, the current module name will be prepended to all description +# unit titles (such as .. function::). +#add_module_names = True + +# If true, sectionauthor and moduleauthor directives will be shown in the +# output. They are ignored by default. +#show_authors = False + +# The name of the Pygments (syntax highlighting) style to use. +pygments_style = 'sphinx' + +# A list of ignored prefixes for module index sorting. +#modindex_common_prefix = [] + +# -- Options for HTML output --------------------------------------------------- + +#html_translator_class = "px_xlator.PxTranslator" + +# The theme to use for HTML and HTML Help pages. Major themes that come with +# Sphinx are currently 'default' and 'sphinxdoc'. +html_theme = 'default' + +# Theme options are theme-specific and customize the look and feel of a theme +# further. For a list of options available for each theme, see the +# documentation. +#html_theme_options = {} + +html_style = "neds.css" + +html_add_permalinks = False + +# Add any paths that contain custom themes here, relative to this directory. +html_theme_path = ['_templates'] + +# The name for this set of Sphinx documents. If None, it defaults to +# " v documentation". +#html_title = None + +# A shorter title for the navigation bar. Default is the same as html_title. +#html_short_title = None + +# The name of an image file (relative to this directory) to place at the top +# of the sidebar. +#html_logo = None + +# The name of an image file (within the static path) to use as favicon of the +# docs. This file should be a Windows icon file (.ico) being 16x16 or 32x32 +# pixels large. +#html_favicon = None + +# Add any paths that contain custom static files (such as style sheets) here, +# relative to this directory. They are copied after the builtin static files, +# so a file named "default.css" will overwrite the builtin "default.css". +html_static_path = ['_static'] + +# If not '', a 'Last updated on:' timestamp is inserted at every page bottom, +# using the given strftime format. +#html_last_updated_fmt = '%b %d, %Y' + +# If true, SmartyPants will be used to convert quotes and dashes to +# typographically correct entities. +html_use_smartypants = True + +# Custom sidebar templates, maps document names to template names. +#html_sidebars = {} + +# Additional templates that should be rendered to pages, maps page names to +# template names. +#html_additional_pages = {} + +# If false, no module index is generated. +html_use_modindex = False + +# If false, no index is generated. +html_use_index = False + +# If true, the index is split into individual pages for each letter. +#html_split_index = False + +# If true, links to the reST sources are added to the pages. +html_show_sourcelink = False + +# If true, an OpenSearch description file will be output, and all pages will +# contain a tag referring to it. The value of this option must be the +# base URL from which the finished HTML is served. +#html_use_opensearch = '' + +# If nonempty, this is the file name suffix for HTML files (e.g. ".xhtml"). +#html_file_suffix = '.px' + +# Output file base name for HTML help builder. +htmlhelp_basename = 'coveragepydoc' + + +# -- Options for LaTeX output -------------------------------------------------- + +# The paper size ('letter' or 'a4'). +#latex_paper_size = 'letter' + +# The font size ('10pt', '11pt' or '12pt'). +#latex_font_size = '10pt' + +# Grouping the document tree into LaTeX files. List of tuples +# (source start file, target name, title, author, documentclass [howto/manual]). +latex_documents = [ + ('index', 'coveragepy.tex', u'coverage.py Documentation', + u'Ned Batchelder', 'manual'), +] + +# The name of an image file (relative to this directory) to place at the top of +# the title page. +#latex_logo = None + +# For "manual" documents, if this is true, then toplevel headings are parts, +# not chapters. +#latex_use_parts = False + +# Additional stuff for the LaTeX preamble. +#latex_preamble = '' + +# Documents to append as an appendix to all manuals. +#latex_appendices = [] + +# If false, no module index is generated. +#latex_use_modindex = True + + +# When auto-doc'ing a class, write the class' docstring and the __init__ docstring +# into the class docs. +autoclass_content = "both" + + + + + +prerelease = bool(max(release).isalpha()) + +def setup(app): + app.add_config_value('prerelease', False, 'env') + print "** Prerelease = %r" % prerelease -- cgit v1.2.1