From 66c90d8aa45c5767bf3e8da8cb9cd049f0faa000 Mon Sep 17 00:00:00 2001
From: Alan Conway <aconway@apache.org>
Date: Wed, 19 Dec 2012 21:22:13 +0000
Subject: QPID-4514: Remove obsolete cluster code: ManagementAgent, Timer, doc
 WIP: rip out old cluster code, misc.

git-svn-id: https://svn.apache.org/repos/asf/qpid/trunk@1424118 13f79535-47bb-0310-9956-ffa450edef68
---
 qpid/cpp/xml/cluster.xml | 339 -----------------------------------------------
 1 file changed, 339 deletions(-)
 delete mode 100644 qpid/cpp/xml/cluster.xml

(limited to 'qpid/cpp/xml/cluster.xml')

diff --git a/qpid/cpp/xml/cluster.xml b/qpid/cpp/xml/cluster.xml
deleted file mode 100644
index 09434ea37b..0000000000
--- a/qpid/cpp/xml/cluster.xml
+++ /dev/null
@@ -1,339 +0,0 @@
-<?xml version="1.0"?>
-<!--
--
-- Licensed to the Apache Software Foundation (ASF) under one
-- or more contributor license agreements.  See the NOTICE file
-- distributed with this work for additional information
-- regarding copyright ownership.  The ASF licenses this file
-- to you under the Apache License, Version 2.0 (the
-- "License"); you may not use this file except in compliance
-- with the License.  You may obtain a copy of the License at
--
--   http://www.apache.org/licenses/LICENSE-2.0
--
-- Unless required by applicable law or agreed to in writing,
-- software distributed under the License is distributed on an
-- "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-- KIND, either express or implied.  See the License for the
-- specific language governing permissions and limitations
-- under the License.
--
--->
-
-<!--
-- NOTE: if you make changes to this XML you must update CLUSTER_VERSION
-- in src/qpid/cluster/Cluster.cpp
--->
-
-<amqp major="0" minor="10" port="5672">
-
-  <!-- Controls sent between cluster nodes. -->
-
-  <class name = "cluster" code = "0x80" label="Qpid clustering extensions.">
-    <doc>Qpid extension class to allow clustered brokers to communicate.</doc>
-
-    <!-- New joiner requests an update to url. -->
-    <control name="update-request" code="0x1">
-      <field name="url" type="str16"/>
-    </control>
-
-    <!-- Sender offers an update to a new joiner. -->
-    <control name = "update-offer" code="0x2">
-      <field name="updatee" type="uint64"/>
-    </control>
-
-    <!-- Sender retracts an offer to a new joiner. -->
-    <control name = "retract-offer" code="0x3">
-      <field name="updatee" type="uint64"/>
-    </control>
-
-    <!-- Possible states for persistent store -->
-    <domain name="store-state" type="uint8">
-      <enum>
-	<choice name="no-store" value="0"/>
-	<choice name="empty-store" value="1"/>
-	<choice name="clean-store" value="2"/>
-	<choice name="dirty-store" value="3"/>
-      </enum>
-    </domain>
-
-    <!-- Status exchanged when new members join the cluster. -->
-    <control name="initial-status" code="0x5">
-      <field name="version" type="uint32"/>
-      <field name="active" type="bit"/>
-      <field name="cluster-id" type="uuid"/>>
-      <field name="store-state" type="store-state"/>
-      <field name="shutdown-id" type="uuid"/>
-      <field name="first-config" type="str16"/>
-      <field name="urls" type="array"/>	       <!-- Array of str16 -->
-    </control>
-
-    <!-- New member or updater is ready as an active member. -->
-    <control name="ready" code="0x10">
-      <field name="url" type="str16"/>
-    </control>
-
-    <control name="config-change" code="0x11" label="Raw cluster membership.">
-      <field name="members" type="vbin16"/> <!-- packed member-id array -->
-      <field name="joined" type="vbin16"/> <!-- packed member-id array -->
-      <field name="left" type="vbin16"/> <!-- packed member-id array -->
-    </control>
-
-    <domain name="error-type" type="uint8" label="Types of error">
-      <enum>
-	<choice name="none" value="0"/>
-	<choice name="session" value="1"/>
-	<choice name="connection" value="2"/>
-      </enum>
-    </domain>
-
-    <!-- Check for error consistency across the cluster -->
-    <control name="error-check" code="0x14">
-      <field name="type" type="error-type"/>
-      <field name="frame-seq" type="sequence-no"/>
-    </control>
-
-    <!-- Synchronize timer tasks across the cluster -->
-    <control name="timer-wakeup" code="0x15">
-      <field name="name" type="str16"/>
-    </control>
-
-    <control name="timer-drop" code="0x16">
-      <field name="name" type="str16"/>
-    </control>
-
-    <!-- Shut down the entire cluster -->
-    <control name="shutdown" code="0x20">
-      <field name="shutdown-id" type="uuid"/>
-    </control>
-
-    <!-- Deliver a message to a queue -->
-    <control name="deliver-to-queue" code="0x21">
-      <field name="queue" type="str16"/>
-      <field name="message" type="vbin32"/>
-    </control>
-
-    <!-- Update the cluster time -->
-    <control name="clock" code="0x22">
-      <field name="time" type="uint64"/>
-    </control>
-
-  </class>
-
-  <!-- Controls associated with a specific connection. -->
-
-  <class name="cluster-connection" code="0x81" label="Qpid clustering extensions.">
-
-    <!-- Announce a new connection -->
-    <control name="announce" code="0x1">
-      <field name="management-id" type="str16"/>
-      <!-- Security Strength Factor (ssf): if the transport provides
-      encryption (e.g. ssl), ssf is the bit length of the key.  Zero if no
-      encryption provided. -->
-      <field name="ssf" type="uint32"/>
-      <!-- external auth id (e.g. ssl client certificate id) -->
-      <field name="authid" type="str16"/>
-      <!-- exclude certain sasl mechs, used with ssl and sasl-external -->
-      <field name="nodict" type="bit"/>
-      <!-- User name as negotiated by SASL -->
-      <field name="username" type="str32"/>
-      <!-- Frames forming the initial connection negotiation.  -->
-      <field name="initial-frames" type="str32"/>
-    </control>
-
-    <!-- Marks the cluster-wide point when a connection is considered closed. -->
-    <control name="deliver-close" code="0x2"/>
-
-    <!-- Permission to generate output up to the limit. -->
-    <control name="deliver-do-output" code="0x3">
-      <field name="limit" type="uint32"/>
-    </control>
-
-    <!-- Abort a connection that is sending invalid data. -->
-    <control name="abort" code="0x4"/>
-
-    <!-- Update controls. Sent to a new broker in joining mode.
-	 A connection is updated as followed:
-	 - send the shadow's management ID in shadow-perpare on the update connection
-	 - open the shadow as a normal connection.
-	 - attach sessions, create consumers, set flow with normal AMQP cokmmands.
-	 - send /reset additional session state with controls below.
-	 - send shadow-ready to mark end of shadow update.
-	 - send membership when entire update is complete.
-    -->
-    <!-- Send the user-id for an update connection. -->
-    <control name="shadow-set-user" code="0x0E">
-      <field name="user-id" type="str16"/>
-    </control>
-
-    <!-- Prepare to send a shadow connection with the given ID. -->
-    <control name="shadow-prepare" code="0x0F">
-      <field name="management-id" type="str16"/>
-    </control>
-
-    <!-- Consumer state that cannot be set by standard AMQP controls. -->
-    <control name="consumer-state" code="0x10">
-      <field name="name" type="str8"/>
-      <field name="blocked" type="bit"/>
-      <field name="notifyEnabled" type="bit"/>
-      <field name="position" type="sequence-no"/>
-      <field name="used-msg-credit" type="uint32"/>
-      <field name="used-byte-credit" type="uint32"/>
-      <field name="deliveryCount" type="uint32"/>
-    </control>
-
-    <!-- Delivery-record for outgoing messages sent but not yet accepted. -->
-    <control name="delivery-record" code ="0x11">
-      <field name="queue" type="str8"/>
-      <field name="position" type="sequence-no"/>
-      <field name="tag" type="str8"/>
-      <field name="id" type="sequence-no"/>
-      <field name="acquired" type="bit"/> <!--If not set, message is on update queue. -->
-      <field name="accepted" type="bit"/>
-      <field name="cancelled" type="bit"/>
-      <field name="completed" type="bit"/>
-      <field name="ended" type="bit"/>
-      <field name="windowing" type="bit"/>
-      <field name="enqueued" type="bit"/>
-      <field name="credit" type="uint32"/>
-    </control>
-
-    <!-- Tx transaction state. -->
-    <control name="tx-start" code="0x12"/>
-    <control name="tx-accept" code="0x13"> <field name="commands" type="sequence-set"/> </control>
-    <control name="tx-dequeue" code="0x14"> <field name="queue" type="str8"/> </control>
-    <control name="tx-enqueue" code="0x15"> <field name="queue" type="str8"/> </control>
-    <control name="tx-publish" code="0x16">
-      <field name="queues" type="array"/>  <!--Array of str8 -->
-      <field name="delivered" type="bit"/>
-    </control>
-    <control name="tx-end" code="0x17"/>
-    <control name="accumulated-ack" code="0x18"> <field name="commands" type="sequence-set"/> </control>
-
-    <!-- Consumers in the connection's output task -->
-    <control name="output-task" code="0x19">
-      <field name="channel" type="uint16"/>
-      <field name="name" type="str8"/>
-    </control>
-
-    <!-- Dtx transaction state. -->
-    <control name="dtx-start" code="0x1A">
-      <field name="xid" type="str16"/>
-      <field name="ended" type="bit"/>
-      <field name="suspended" type="bit"/>
-      <field name="failed" type="bit"/>
-      <field name="expired" type="bit"/>
-    </control>
-    <control name="dtx-end" code="0x1B"/>
-
-    <control name="dtx-ack" code="0x1C"/>
-
-    <control name="dtx-buffer-ref" code="0x1D">
-      <field name="xid" type="str16"/>
-      <field name="index" type="uint32"/>
-      <field name="suspended" type="bit"/>
-    </control>
-
-    <control name="dtx-work-record" code="0x1E">
-      <field name="xid" type="str16"/>
-      <field name="prepared" type="bit"/>
-      <field name="timeout" type="uint32"/>
-    </control>
-
-    <!-- Complete a session state update. -->
-    <control name="session-state" code="0x1F">
-      <!-- Target session deduced from channel number.  -->
-      <field name="replay-start" type="sequence-no"/>	       <!-- Replay frames will start from this point.-->
-      <field name="command-point" type="sequence-no"/>	       <!-- Id of next command sent -->
-      <field name="sent-incomplete" type="sequence-set"/>      <!-- Commands sent and incomplete. -->
-
-      <field name="expected" type="sequence-no"/>	       <!-- Next command expected. -->
-      <field name="received" type="sequence-no"/>	       <!-- Received up to here (>= expected) -->
-      <field name="unknown-completed" type="sequence-set"/>    <!-- Completed but not known to peer. -->
-      <field name="received-incomplete" type="sequence-set"/>  <!-- Received and incomplete -->
-      <field name="dtx-selected" type="bit"/>
-    </control>
-
-    <!-- Complete a shadow connection update. -->
-    <control name="shadow-ready" code="0x20" label="End of shadow connection update.">
-      <field name="member-id" type="uint64"/>
-      <field name="connection-id" type="uint64"/>
-      <field name="management-id" type="str16"/>
-      <field name="user-name" type="str8"/>
-      <field name="fragment" type="str32"/>
-      <field name="send-max" type="uint32"/>
-    </control>
-
-    <!-- Complete a cluster state update. -->
-    <control name="membership" code="0x21" label="Cluster membership details.">
-      <field name="joiners" type="map"/> <!-- member-id -> URL -->
-      <field name="members" type="map"/> <!-- member-id -> state -->
-      <field name="frame-seq" type="sequence-no"/> <!-- frame sequence number -->
-    </control>
-
-    <!-- Updater cannot fulfill an update offer. -->
-    <control name = "retract-offer" code="0x22"/>
-
-    <!-- Set the position of a replicated queue. -->
-    <control name="queue-position" code="0x30">
-      <field name="queue" type="str8"/>
-      <field name="position" type="sequence-no"/>
-    </control>
-
-    <!-- Replicate encoded exchanges/queues. -->
-    <control name="exchange" code="0x31"><field name="encoded" type="str32"/></control>
-
-    <!-- Add a listener to a queue -->
-    <control name="add-queue-listener" code="0x34">
-      <field name="queue" type="str8"/>
-      <field name="consumer" type="uint32"/>
-    </control>
-
-    <!-- added by jrd.  propagate a management-setup-state widget -->
-    <control name="management-setup-state" code="0x36">
-      <field name="objectNum" type="uint64"/>
-      <field name="bootSequence" type="uint16"/>
-      <field name="broker-id" type="uuid"/>
-      <field name="vendor" type="str32"/>
-      <field name="product" type="str32"/>
-      <field name="instance" type="str32"/>
-    </control>
-
-    <!-- Replicate encoded config objects - e.g. links and bridges. -->
-    <control name="config" code="0x37"><field name="encoded" type="str32"/></control>
-
-    <!-- Set the fairshare delivery related state of a replicated queue. -->
-    <control name="queue-fairshare-state" code="0x38">
-      <field name="queue" type="str8"/>
-      <field name="position" type="uint8"/>
-      <field name="count" type="uint8"/>
-    </control>
-
-    <!-- Replicate a QueueObserver for a given queue. -->
-    <control name="queue-observer-state" code="0x39">
-      <field name="queue" type="str8"/>
-      <field name="observer-id" type="str8"/>
-      <field name="state" type="map"/>    <!-- "name"=value -->
-    </control>
-
-    <!-- Update the cluster time -->
-    <control name="clock" code="0x40">
-      <field name="time" type="uint64"/>
-    </control>
-
-    <!-- Update a queue's dequeue rate -->
-    <control name="queue-dequeue-since-purge-state" code="0x41">
-      <field name="queue" type="str8"/>
-      <field name="dequeueSincePurge" type="uint32"/>
-    </control>
-
-    <!-- Replicate the internal state for an object - e.g. Links, bridges, etc -->
-    <control name="internal-state" code="0x42">
-      <field name="type" type="str8"/> <!-- The type of object the state is for (e.g. 'link') -->
-      <field name="name" type="str8"/> <!-- Identifies the particular object to be updated -->
-      <field name="state" type="map"/> <!-- The internal state for the object -->
-    </control>
-
-  </class>
-
-</amqp>
-- 
cgit v1.2.1