======= CHANGES ======= ------ 0.6.39 ------ * Add support for console launchers on ARM platforms. * Fix possible issue in GUI launchers where the subsystem was not supplied to the linker. * Launcher build script now refactored for robustness. * Issue #375: Resources extracted from a zip egg to the file system now also check the contents of the file against the zip contents during each invocation of get_resource_filename. ------ 0.6.38 ------ * Issue #371: The launcher manifest file is now installed properly. ------ 0.6.37 ------ * Issue #143: Launcher scripts, including easy_install itself, are now accompanied by a manifest on 32-bit Windows environments to avoid the Installer Detection Technology and thus undesirable UAC elevation described in `this Microsoft article `_. ------ 0.6.36 ------ * Pull Request #35: In `Buildout issue 64 `_, it was reported that under Python 3, installation of distutils scripts could attempt to copy the ``__pycache__`` directory as a file, causing an error, apparently only under Windows. Easy_install now skips all directories when processing metadata scripts. ------ 0.6.35 ------ Note this release is backward-incompatible with distribute 0.6.23-0.6.34 in how it parses version numbers. * Issue #278: Restored compatibility with distribute 0.6.22 and setuptools 0.6. Updated the documentation to match more closely with the version parsing as intended in setuptools 0.6. ------ 0.6.34 ------ * Issue #341: 0.6.33 fails to build under Python 2.4. ------ 0.6.33 ------ * Fix 2 errors with Jython 2.5. * Fix 1 failure with Jython 2.5 and 2.7. * Disable workaround for Jython scripts on Linux systems. * Issue #336: `setup.py` no longer masks failure exit code when tests fail. * Fix issue in pkg_resources where try/except around a platform-dependent import would trigger hook load failures on Mercurial. See pull request 32 for details. * Issue #341: Fix a ResourceWarning. ------ 0.6.32 ------ * Fix test suite with Python 2.6. * Fix some DeprecationWarnings and ResourceWarnings. * Issue #335: Backed out `setup_requires` superceding installed requirements until regression can be addressed. ------ 0.6.31 ------ * Issue #303: Make sure the manifest only ever contains UTF-8 in Python 3. * Issue #329: Properly close files created by tests for compatibility with Jython. * Work around Jython bugs `#1980 `_ and `#1981 `_. * Issue #334: Provide workaround for packages that reference `sys.__stdout__` such as numpy does. This change should address `virtualenv #359 `_ as long as the system encoding is UTF-8 or the IO encoding is specified in the environment, i.e.:: PYTHONIOENCODING=utf8 pip install numpy * Fix for encoding issue when installing from Windows executable on Python 3. * Issue #323: Allow `setup_requires` requirements to supercede installed requirements. Added some new keyword arguments to existing pkg_resources methods. Also had to updated how __path__ is handled for namespace packages to ensure that when a new egg distribution containing a namespace package is placed on sys.path, the entries in __path__ are found in the same order they would have been in had that egg been on the path when pkg_resources was first imported. ------ 0.6.30 ------ * Issue #328: Clean up temporary directories in distribute_setup.py. * Fix fatal bug in distribute_setup.py. ------ 0.6.29 ------ * Pull Request #14: Honor file permissions in zip files. * Issue #327: Merged pull request #24 to fix a dependency problem with pip. * Merged pull request #23 to fix https://github.com/pypa/virtualenv/issues/301. * If Sphinx is installed, the `upload_docs` command now runs `build_sphinx` to produce uploadable documentation. * Issue #326: `upload_docs` provided mangled auth credentials under Python 3. * Issue #320: Fix check for "createable" in distribute_setup.py. * Issue #305: Remove a warning that was triggered during normal operations. * Issue #311: Print metadata in UTF-8 independent of platform. * Issue #303: Read manifest file with UTF-8 encoding under Python 3. * Issue #301: Allow to run tests of namespace packages when using 2to3. * Issue #304: Prevent import loop in site.py under Python 3.3. * Issue #283: Reenable scanning of `*.pyc` / `*.pyo` files on Python 3.3. * Issue #299: The develop command didn't work on Python 3, when using 2to3, as the egg link would go to the Python 2 source. Linking to the 2to3'd code in build/lib makes it work, although you will have to rebuild the module before testing it. * Issue #306: Even if 2to3 is used, we build in-place under Python 2. * Issue #307: Prints the full path when .svn/entries is broken. * Issue #313: Support for sdist subcommands (Python 2.7) * Issue #314: test_local_index() would fail an OS X. * Issue #310: Non-ascii characters in a namespace __init__.py causes errors. * Issue #218: Improved documentation on behavior of `package_data` and `include_package_data`. Files indicated by `package_data` are now included in the manifest. * `distribute_setup.py` now allows a `--download-base` argument for retrieving distribute from a specified location. ------ 0.6.28 ------ * Issue #294: setup.py can now be invoked from any directory. * Scripts are now installed honoring the umask. * Added support for .dist-info directories. * Issue #283: Fix and disable scanning of `*.pyc` / `*.pyo` files on Python 3.3. ------ 0.6.27 ------ * Support current snapshots of CPython 3.3. * Distribute now recognizes README.rst as a standard, default readme file. * Exclude 'encodings' modules when removing modules from sys.modules. Workaround for #285. * Issue #231: Don't fiddle with system python when used with buildout (bootstrap.py) ------ 0.6.26 ------ * Issue #183: Symlinked files are now extracted from source distributions. * Issue #227: Easy_install fetch parameters are now passed during the installation of a source distribution; now fulfillment of setup_requires dependencies will honor the parameters passed to easy_install. ------ 0.6.25 ------ * Issue #258: Workaround a cache issue * Issue #260: distribute_setup.py now accepts the --user parameter for Python 2.6 and later. * Issue #262: package_index.open_with_auth no longer throws LookupError on Python 3. * Issue #269: AttributeError when an exception occurs reading Manifest.in on late releases of Python. * Issue #272: Prevent TypeError when namespace package names are unicode and single-install-externally-managed is used. Also fixes PIP issue 449. * Issue #273: Legacy script launchers now install with Python2/3 support. ------ 0.6.24 ------ * Issue #249: Added options to exclude 2to3 fixers ------ 0.6.23 ------ * Issue #244: Fixed a test * Issue #243: Fixed a test * Issue #239: Fixed a test * Issue #240: Fixed a test * Issue #241: Fixed a test * Issue #237: Fixed a test * Issue #238: easy_install now uses 64bit executable wrappers on 64bit Python * Issue #208: Fixed parsed_versions, it now honors post-releases as noted in the documentation * Issue #207: Windows cli and gui wrappers pass CTRL-C to child python process * Issue #227: easy_install now passes its arguments to setup.py bdist_egg * Issue #225: Fixed a NameError on Python 2.5, 2.4 ------ 0.6.21 ------ * Issue #225: FIxed a regression on py2.4 ------ 0.6.20 ------ * Issue #135: Include url in warning when processing URLs in package_index. * Issue #212: Fix issue where easy_instal fails on Python 3 on windows installer. * Issue #213: Fix typo in documentation. ------ 0.6.19 ------ * Issue 206: AttributeError: 'HTTPMessage' object has no attribute 'getheaders' ------ 0.6.18 ------ * Issue 210: Fixed a regression introduced by Issue 204 fix. ------ 0.6.17 ------ * Support 'DISTRIBUTE_DISABLE_VERSIONED_EASY_INSTALL_SCRIPT' environment variable to allow to disable installation of easy_install-${version} script. * Support Python >=3.1.4 and >=3.2.1. * Issue 204: Don't try to import the parent of a namespace package in declare_namespace * Issue 196: Tolerate responses with multiple Content-Length headers * Issue 205: Sandboxing doesn't preserve working_set. Leads to setup_requires problems. ------ 0.6.16 ------ * Builds sdist gztar even on Windows (avoiding Issue 193). * Issue 192: Fixed metadata omitted on Windows when package_dir specified with forward-slash. * Issue 195: Cython build support. * Issue 200: Issues with recognizing 64-bit packages on Windows. ------ 0.6.15 ------ * Fixed typo in bdist_egg * Several issues under Python 3 has been solved. * Issue 146: Fixed missing DLL files after easy_install of windows exe package. ------ 0.6.14 ------ * Issue 170: Fixed unittest failure. Thanks to Toshio. * Issue 171: Fixed race condition in unittests cause deadlocks in test suite. * Issue 143: Fixed a lookup issue with easy_install. Thanks to David and Zooko. * Issue 174: Fixed the edit mode when its used with setuptools itself ------ 0.6.13 ------ * Issue 160: 2.7 gives ValueError("Invalid IPv6 URL") * Issue 150: Fixed using ~/.local even in a --no-site-packages virtualenv * Issue 163: scan index links before external links, and don't use the md5 when comparing two distributions ------ 0.6.12 ------ * Issue 149: Fixed various failures on 2.3/2.4 ------ 0.6.11 ------ * Found another case of SandboxViolation - fixed * Issue 15 and 48: Introduced a socket timeout of 15 seconds on url openings * Added indexsidebar.html into MANIFEST.in * Issue 108: Fixed TypeError with Python3.1 * Issue 121: Fixed --help install command trying to actually install. * Issue 112: Added an os.makedirs so that Tarek's solution will work. * Issue 133: Added --no-find-links to easy_install * Added easy_install --user * Issue 100: Fixed develop --user not taking '.' in PYTHONPATH into account * Issue 134: removed spurious UserWarnings. Patch by VanLindberg * Issue 138: cant_write_to_target error when setup_requires is used. * Issue 147: respect the sys.dont_write_bytecode flag ------ 0.6.10 ------ * Reverted change made for the DistributionNotFound exception because zc.buildout uses the exception message to get the name of the distribution. ----- 0.6.9 ----- * Issue 90: unknown setuptools version can be added in the working set * Issue 87: setupt.py doesn't try to convert distribute_setup.py anymore Initial Patch by arfrever. * Issue 89: added a side bar with a download link to the doc. * Issue 86: fixed missing sentence in pkg_resources doc. * Added a nicer error message when a DistributionNotFound is raised. * Issue 80: test_develop now works with Python 3.1 * Issue 93: upload_docs now works if there is an empty sub-directory. * Issue 70: exec bit on non-exec files * Issue 99: now the standalone easy_install command doesn't uses a "setup.cfg" if any exists in the working directory. It will use it only if triggered by ``install_requires`` from a setup.py call (install, develop, etc). * Issue 101: Allowing ``os.devnull`` in Sandbox * Issue 92: Fixed the "no eggs" found error with MacPort (platform.mac_ver() fails) * Issue 103: test_get_script_header_jython_workaround not run anymore under py3 with C or POSIX local. Contributed by Arfrever. * Issue 104: remvoved the assertion when the installation fails, with a nicer message for the end user. * Issue 100: making sure there's no SandboxViolation when the setup script patches setuptools. ----- 0.6.8 ----- * Added "check_packages" in dist. (added in Setuptools 0.6c11) * Fixed the DONT_PATCH_SETUPTOOLS state. ----- 0.6.7 ----- * Issue 58: Added --user support to the develop command * Issue 11: Generated scripts now wrap their call to the script entry point in the standard "if name == 'main'" * Added the 'DONT_PATCH_SETUPTOOLS' environment variable, so virtualenv can drive an installation that doesn't patch a global setuptools. * Reviewed unladen-swallow specific change from http://code.google.com/p/unladen-swallow/source/detail?spec=svn875&r=719 and determined that it no longer applies. Distribute should work fine with Unladen Swallow 2009Q3. * Issue 21: Allow PackageIndex.open_url to gracefully handle all cases of a httplib.HTTPException instead of just InvalidURL and BadStatusLine. * Removed virtual-python.py from this distribution and updated documentation to point to the actively maintained virtualenv instead. * Issue 64: use_setuptools no longer rebuilds the distribute egg every time it is run * use_setuptools now properly respects the requested version * use_setuptools will no longer try to import a distribute egg for the wrong Python version * Issue 74: no_fake should be True by default. * Issue 72: avoid a bootstrapping issue with easy_install -U ----- 0.6.6 ----- * Unified the bootstrap file so it works on both py2.x and py3k without 2to3 (patch by Holger Krekel) ----- 0.6.5 ----- * Issue 65: cli.exe and gui.exe are now generated at build time, depending on the platform in use. * Issue 67: Fixed doc typo (PEP 381/382) * Distribute no longer shadows setuptools if we require a 0.7-series setuptools. And an error is raised when installing a 0.7 setuptools with distribute. * When run from within buildout, no attempt is made to modify an existing setuptools egg, whether in a shared egg directory or a system setuptools. * Fixed a hole in sandboxing allowing builtin file to write outside of the sandbox. ----- 0.6.4 ----- * Added the generation of `distribute_setup_3k.py` during the release. This closes issue #52. * Added an upload_docs command to easily upload project documentation to PyPI's http://packages.python.org. This close issue #56. * Fixed a bootstrap bug on the use_setuptools() API. ----- 0.6.3 ----- setuptools ========== * Fixed a bunch of calls to file() that caused crashes on Python 3. bootstrapping ============= * Fixed a bug in sorting that caused bootstrap to fail on Python 3. ----- 0.6.2 ----- setuptools ========== * Added Python 3 support; see docs/python3.txt. This closes http://bugs.python.org/setuptools/issue39. * Added option to run 2to3 automatically when installing on Python 3. This closes issue #31. * Fixed invalid usage of requirement.parse, that broke develop -d. This closes http://bugs.python.org/setuptools/issue44. * Fixed script launcher for 64-bit Windows. This closes http://bugs.python.org/setuptools/issue2. * KeyError when compiling extensions. This closes http://bugs.python.org/setuptools/issue41. bootstrapping ============= * Fixed bootstrap not working on Windows. This closes issue #49. * Fixed 2.6 dependencies. This closes issue #50. * Make sure setuptools is patched when running through easy_install This closes http://bugs.python.org/setuptools/issue40. ----- 0.6.1 ----- setuptools ========== * package_index.urlopen now catches BadStatusLine and malformed url errors. This closes issue #16 and issue #18. * zip_ok is now False by default. This closes http://bugs.python.org/setuptools/issue33. * Fixed invalid URL error catching. http://bugs.python.org/setuptools/issue20. * Fixed invalid bootstraping with easy_install installation (issue #40). Thanks to Florian Schulze for the help. * Removed buildout/bootstrap.py. A new repository will create a specific bootstrap.py script. bootstrapping ============= * The boostrap process leave setuptools alone if detected in the system and --root or --prefix is provided, but is not in the same location. This closes issue #10. --- 0.6 --- setuptools ========== * Packages required at build time where not fully present at install time. This closes issue #12. * Protected against failures in tarfile extraction. This closes issue #10. * Made Jython api_tests.txt doctest compatible. This closes issue #7. * sandbox.py replaced builtin type file with builtin function open. This closes issue #6. * Immediately close all file handles. This closes issue #3. * Added compatibility with Subversion 1.6. This references issue #1. pkg_resources ============= * Avoid a call to /usr/bin/sw_vers on OSX and use the official platform API instead. Based on a patch from ronaldoussoren. This closes issue #5. * Fixed a SandboxViolation for mkdir that could occur in certain cases. This closes issue #13. * Allow to find_on_path on systems with tight permissions to fail gracefully. This closes issue #9. * Corrected inconsistency between documentation and code of add_entry. This closes issue #8. * Immediately close all file handles. This closes issue #3. easy_install ============ * Immediately close all file handles. This closes issue #3.