https://bugs.webkit.org/show_bug.cgi?id=118662.
Reviewed by Oliver Hunt.
Source/JavaScriptCore:
r152494 added the recording of lineStart values for divot positions.
This is needed for the computation of column numbers. Similarly, it also
added the recording of line numbers for the divot positions. One problem
with the approach taken was that the line and lineStart values were
recorded independently, and hence were not always guaranteed to be
sampled at the same place that the divot position is recorded. This
resulted in potential mismatches that cause some assertions to fail.
The solution is to introduce a JSTextPosition abstraction that records
the divot position, line, and lineStart as a single quantity. Wherever
we record the divot position as an unsigned int previously, we now record
its JSTextPosition which captures all 3 values in one go. This ensures
that the captured line and lineStart will always match the captured divot
position.
* bytecompiler/BytecodeGenerator.cpp:
(JSC::BytecodeGenerator::emitCall):
(JSC::BytecodeGenerator::emitCallEval):
(JSC::BytecodeGenerator::emitCallVarargs):
(JSC::BytecodeGenerator::emitConstruct):
(JSC::BytecodeGenerator::emitDebugHook):
- Use JSTextPosition instead of passing line and lineStart explicitly.
* bytecompiler/BytecodeGenerator.h:
(JSC::BytecodeGenerator::emitExpressionInfo):
- Use JSTextPosition instead of passing line and lineStart explicitly.
* bytecompiler/NodesCodegen.cpp:
(JSC::ThrowableExpressionData::emitThrowReferenceError):
(JSC::ResolveNode::emitBytecode):
(JSC::BracketAccessorNode::emitBytecode):
(JSC::DotAccessorNode::emitBytecode):
(JSC::NewExprNode::emitBytecode):
(JSC::EvalFunctionCallNode::emitBytecode):
(JSC::FunctionCallValueNode::emitBytecode):
(JSC::FunctionCallResolveNode::emitBytecode):
(JSC::FunctionCallBracketNode::emitBytecode):
(JSC::FunctionCallDotNode::emitBytecode):
(JSC::CallFunctionCallDotNode::emitBytecode):
(JSC::ApplyFunctionCallDotNode::emitBytecode):
(JSC::PostfixNode::emitResolve):
(JSC::PostfixNode::emitBracket):
(JSC::PostfixNode::emitDot):
(JSC::DeleteResolveNode::emitBytecode):
(JSC::DeleteBracketNode::emitBytecode):
(JSC::DeleteDotNode::emitBytecode):
(JSC::PrefixNode::emitResolve):
(JSC::PrefixNode::emitBracket):
(JSC::PrefixNode::emitDot):
(JSC::UnaryOpNode::emitBytecode):
(JSC::BinaryOpNode::emitStrcat):
(JSC::BinaryOpNode::emitBytecode):
(JSC::ThrowableBinaryOpNode::emitBytecode):
(JSC::InstanceOfNode::emitBytecode):
(JSC::emitReadModifyAssignment):
(JSC::ReadModifyResolveNode::emitBytecode):
(JSC::AssignResolveNode::emitBytecode):
(JSC::AssignDotNode::emitBytecode):
(JSC::ReadModifyDotNode::emitBytecode):
(JSC::AssignBracketNode::emitBytecode):
(JSC::ReadModifyBracketNode::emitBytecode):
(JSC::ForInNode::emitBytecode):
(JSC::WithNode::emitBytecode):
(JSC::ThrowNode::emitBytecode):
- Use JSTextPosition instead of passing line and lineStart explicitly.
* parser/ASTBuilder.h:
- Replaced ASTBuilder::PositionInfo with JSTextPosition.
(JSC::ASTBuilder::BinaryOpInfo::BinaryOpInfo):
(JSC::ASTBuilder::AssignmentInfo::AssignmentInfo):
(JSC::ASTBuilder::createResolve):
(JSC::ASTBuilder::createBracketAccess):
(JSC::ASTBuilder::createDotAccess):
(JSC::ASTBuilder::createRegExp):
(JSC::ASTBuilder::createNewExpr):
(JSC::ASTBuilder::createAssignResolve):
(JSC::ASTBuilder::createExprStatement):
(JSC::ASTBuilder::createForInLoop):
(JSC::ASTBuilder::createReturnStatement):
(JSC::ASTBuilder::createBreakStatement):
(JSC::ASTBuilder::createContinueStatement):
(JSC::ASTBuilder::createLabelStatement):
(JSC::ASTBuilder::createWithStatement):
(JSC::ASTBuilder::createThrowStatement):
(JSC::ASTBuilder::appendBinaryExpressionInfo):
(JSC::ASTBuilder::appendUnaryToken):
(JSC::ASTBuilder::unaryTokenStackLastStart):
(JSC::ASTBuilder::assignmentStackAppend):
(JSC::ASTBuilder::createAssignment):
(JSC::ASTBuilder::setExceptionLocation):
(JSC::ASTBuilder::makeDeleteNode):
(JSC::ASTBuilder::makeFunctionCallNode):
(JSC::ASTBuilder::makeBinaryNode):
(JSC::ASTBuilder::makeAssignNode):
(JSC::ASTBuilder::makePrefixNode):
(JSC::ASTBuilder::makePostfixNode):
- Use JSTextPosition instead of passing line and lineStart explicitly.
* parser/Lexer.cpp:
(JSC::::lex):
- Added support for capturing the appropriate JSTextPositions instead
of just the character offset.
* parser/Lexer.h:
(JSC::Lexer::currentPosition):
(JSC::::lexExpectIdentifier):
- Added support for capturing the appropriate JSTextPositions instead
of just the character offset.
* parser/NodeConstructors.h:
(JSC::Node::Node):
(JSC::ResolveNode::ResolveNode):
(JSC::EvalFunctionCallNode::EvalFunctionCallNode):
(JSC::FunctionCallValueNode::FunctionCallValueNode):
(JSC::FunctionCallResolveNode::FunctionCallResolveNode):
(JSC::FunctionCallBracketNode::FunctionCallBracketNode):
(JSC::FunctionCallDotNode::FunctionCallDotNode):
(JSC::CallFunctionCallDotNode::CallFunctionCallDotNode):
(JSC::ApplyFunctionCallDotNode::ApplyFunctionCallDotNode):
(JSC::PostfixNode::PostfixNode):
(JSC::DeleteResolveNode::DeleteResolveNode):
(JSC::DeleteBracketNode::DeleteBracketNode):
(JSC::DeleteDotNode::DeleteDotNode):
(JSC::PrefixNode::PrefixNode):
(JSC::ReadModifyResolveNode::ReadModifyResolveNode):
(JSC::ReadModifyBracketNode::ReadModifyBracketNode):
(JSC::AssignBracketNode::AssignBracketNode):
(JSC::AssignDotNode::AssignDotNode):
(JSC::ReadModifyDotNode::ReadModifyDotNode):
(JSC::AssignErrorNode::AssignErrorNode):
(JSC::WithNode::WithNode):
(JSC::ForInNode::ForInNode):
- Use JSTextPosition instead of passing line and lineStart explicitly.
* parser/Nodes.cpp:
(JSC::StatementNode::setLoc):
- Use JSTextPosition instead of passing line and lineStart explicitly.
* parser/Nodes.h:
(JSC::Node::lineNo):
(JSC::Node::startOffset):
(JSC::Node::lineStartOffset):
(JSC::Node::position):
(JSC::ThrowableExpressionData::ThrowableExpressionData):
(JSC::ThrowableExpressionData::setExceptionSourceCode):
(JSC::ThrowableExpressionData::divot):
(JSC::ThrowableExpressionData::divotStart):
(JSC::ThrowableExpressionData::divotEnd):
(JSC::ThrowableSubExpressionData::ThrowableSubExpressionData):
(JSC::ThrowableSubExpressionData::setSubexpressionInfo):
(JSC::ThrowableSubExpressionData::subexpressionDivot):
(JSC::ThrowableSubExpressionData::subexpressionStart):
(JSC::ThrowableSubExpressionData::subexpressionEnd):
(JSC::ThrowablePrefixedSubExpressionData::ThrowablePrefixedSubExpressionData):
(JSC::ThrowablePrefixedSubExpressionData::setSubexpressionInfo):
(JSC::ThrowablePrefixedSubExpressionData::subexpressionDivot):
(JSC::ThrowablePrefixedSubExpressionData::subexpressionStart):
(JSC::ThrowablePrefixedSubExpressionData::subexpressionEnd):
- Use JSTextPosition instead of passing line and lineStart explicitly.
* parser/Parser.cpp:
(JSC::::Parser):
(JSC::::parseInner):
- Use JSTextPosition instead of passing line and lineStart explicitly.
(JSC::::didFinishParsing):
- Remove setting of m_lastLine value. We always pass in the value from
m_lastLine anyway. So, this assignment is effectively a nop.
(JSC::::parseVarDeclaration):
(JSC::::parseVarDeclarationList):
(JSC::::parseForStatement):
(JSC::::parseBreakStatement):
(JSC::::parseContinueStatement):
(JSC::::parseReturnStatement):
(JSC::::parseThrowStatement):
(JSC::::parseWithStatement):
(JSC::::parseTryStatement):
(JSC::::parseBlockStatement):
(JSC::::parseFunctionDeclaration):
(JSC::LabelInfo::LabelInfo):
(JSC::::parseExpressionOrLabelStatement):
(JSC::::parseExpressionStatement):
(JSC::::parseAssignmentExpression):
(JSC::::parseBinaryExpression):
(JSC::::parseProperty):
(JSC::::parsePrimaryExpression):
(JSC::::parseMemberExpression):
(JSC::::parseUnaryExpression):
- Use JSTextPosition instead of passing line and lineStart explicitly.
* parser/Parser.h:
(JSC::Parser::next):
(JSC::Parser::nextExpectIdentifier):
(JSC::Parser::getToken):
(JSC::Parser::tokenStartPosition):
(JSC::Parser::tokenEndPosition):
(JSC::Parser::lastTokenEndPosition):
(JSC::::parse):
- Use JSTextPosition instead of passing line and lineStart explicitly.
* parser/ParserTokens.h:
(JSC::JSTextPosition::JSTextPosition):
(JSC::JSTextPosition::operator+):
(JSC::JSTextPosition::operator-):
(JSC::JSTextPosition::operator int):
- Added JSTextPosition.
* parser/SyntaxChecker.h:
(JSC::SyntaxChecker::makeFunctionCallNode):
(JSC::SyntaxChecker::makeAssignNode):
(JSC::SyntaxChecker::makePrefixNode):
(JSC::SyntaxChecker::makePostfixNode):
(JSC::SyntaxChecker::makeDeleteNode):
(JSC::SyntaxChecker::createResolve):
(JSC::SyntaxChecker::createBracketAccess):
(JSC::SyntaxChecker::createDotAccess):
(JSC::SyntaxChecker::createRegExp):
(JSC::SyntaxChecker::createNewExpr):
(JSC::SyntaxChecker::createAssignResolve):
(JSC::SyntaxChecker::createForInLoop):
(JSC::SyntaxChecker::createReturnStatement):
(JSC::SyntaxChecker::createBreakStatement):
(JSC::SyntaxChecker::createContinueStatement):
(JSC::SyntaxChecker::createWithStatement):
(JSC::SyntaxChecker::createLabelStatement):
(JSC::SyntaxChecker::createThrowStatement):
(JSC::SyntaxChecker::appendBinaryExpressionInfo):
(JSC::SyntaxChecker::operatorStackPop):
- Use JSTextPosition instead of passing line and lineStart explicitly.
git-svn-id: http://svn.webkit.org/repository/webkit/trunk@153477 268f45cc-cd09-0410-ab3c-d52691b4dbfc
Task-number: QTBUG-38708
Change-Id: Ic6a65e8915c634dffe76b7181b38d6be0ab4a45d
Reviewed-by: Michael Bruning <michael.bruning@digia.com>