diff options
Diffstat (limited to 'client/dhclient-script.8')
| -rw-r--r-- | client/dhclient-script.8 | 233 |
1 files changed, 233 insertions, 0 deletions
diff --git a/client/dhclient-script.8 b/client/dhclient-script.8 new file mode 100644 index 0000000..5df832b --- /dev/null +++ b/client/dhclient-script.8 @@ -0,0 +1,233 @@ +.\" dhclient-script.8 +.\" +.\" Copyright (c) 2012,2014 by Internet Systems Consortium, Inc. ("ISC") +.\" Copyright (c) 2009-2010 by Internet Systems Consortium, Inc. ("ISC") +.\" Copyright (c) 2004-2005 by Internet Systems Consortium, Inc. ("ISC") +.\" Copyright (c) 1996-2003 by Internet Software Consortium +.\" +.\" Permission to use, copy, modify, and distribute this software for any +.\" purpose with or without fee is hereby granted, provided that the above +.\" copyright notice and this permission notice appear in all copies. +.\" +.\" THE SOFTWARE IS PROVIDED "AS IS" AND ISC DISCLAIMS ALL WARRANTIES +.\" WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF +.\" MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL ISC BE LIABLE FOR +.\" ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES +.\" WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN +.\" ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT +.\" OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. +.\" +.\" Internet Systems Consortium, Inc. +.\" 950 Charter Street +.\" Redwood City, CA 94063 +.\" <info@isc.org> +.\" https://www.isc.org/ +.\" +.\" Support and other services are available for ISC products - see +.\" https://www.isc.org for more information or to learn more about ISC. +.\" +.\" $Id: dhclient-script.8,v 1.12.24.2 2010/07/06 19:03:11 sar Exp $ +.\" +.TH dhclient-script 8 +.SH NAME +dhclient-script - DHCP client network configuration script +.SH DESCRIPTION +The DHCP client network configuration script is invoked from time to +time by \fBdhclient(8)\fR. This script is used by the dhcp client to +set each interface's initial configuration prior to requesting an +address, to test the address once it has been offered, and to set the +interface's final configuration once a lease has been acquired. If no +lease is acquired, the script is used to test predefined leases, if +any, and also called once if no valid lease can be identified. +.PP +This script is not meant to be customized by the end user. If local +customizations are needed, they should be possible using the enter and +exit hooks provided (see HOOKS for details). These hooks will allow the +user to override the default behaviour of the client in creating a +.B /etc/resolv.conf +file. +.PP +No standard client script exists for some operating systems, even though +the actual client may work, so a pioneering user may well need to create +a new script or modify an existing one. In general, customizations specific +to a particular computer should be done in the +.B ETCDIR/dhclient.conf +file. If you find that you can't make such a customization without +customizing +.B ETCDIR/dhclient.conf +or using the enter and exit hooks, please submit a bug report. +.SH HOOKS +When it starts, the client script first defines a shell function, +.B make_resolv_conf , +which is later used to create the +.B /etc/resolv.conf +file. To override the default behaviour, redefine this function in +the enter hook script. +.PP +On after defining the make_resolv_conf function, the client script checks +for the presence of an executable +.B ETCDIR/dhclient-enter-hooks +script, and if present, it invokes the script inline, using the Bourne +shell \'.\' command. The entire environment documented under OPERATION +is available to this script, which may modify the environment if needed +to change the behaviour of the script. If an error occurs during the +execution of the script, it can set the exit_status variable to a nonzero +value, and +.B CLIENTBINDIR/dhclient-script +will exit with that error code immediately after the client script exits. +.PP +After all processing has completed, +.B CLIENTBINDIR/dhclient-script +checks for the presence of an executable +.B ETCDIR/dhclient-exit-hooks +script, which if present is invoked using the \'.\' command. The exit +status of dhclient-script will be passed to dhclient-exit-hooks in the +exit_status shell variable, and will always be zero if the script +succeeded at the task for which it was invoked. The rest of the +environment as described previously for dhclient-enter-hooks is also +present. The +.B ETCDIR/dhclient-exit-hooks +script can modify the valid of exit_status to change the exit status +of dhclient-script. +.SH OPERATION +When dhclient needs to invoke the client configuration script, it +defines a set of variables in the environment, and then invokes +.B CLIENTBINDIR/dhclient-script. +In all cases, $reason is set to the name of the reason why the script +has been invoked. The following reasons are currently defined: +MEDIUM, PREINIT, BOUND, RENEW, REBIND, REBOOT, EXPIRE, FAIL, STOP, RELEASE, +NBI and TIMEOUT. +.PP +.SH MEDIUM +The DHCP client is requesting that an interface's media type +be set. The interface name is passed in $interface, and the media +type is passed in $medium. +.SH PREINIT +The DHCP client is requesting that an interface be configured as +required in order to send packets prior to receiving an actual +address. For clients which use the BSD socket library, this means +configuring the interface with an IP address of 0.0.0.0 and a +broadcast address of 255.255.255.255. For other clients, it may be +possible to simply configure the interface up without actually giving +it an IP address at all. The interface name is passed in $interface, +and the media type in $medium. +.PP +If an IP alias has been declared in dhclient.conf, its address will be +passed in $alias_ip_address, and that ip alias should be deleted from +the interface, along with any routes to it. +.SH BOUND +The DHCP client has done an initial binding to a new address. The +new ip address is passed in $new_ip_address, and the interface name is +passed in $interface. The media type is passed in $medium. Any +options acquired from the server are passed using the option name +described in \fBdhcp-options\fR, except that dashes (\'-\') are replaced +by underscores (\'_\') in order to make valid shell variables, and the +variable names start with new_. So for example, the new subnet mask +would be passed in $new_subnet_mask. The options that the client +explicitly requested via a PRL or ORO option are passed with the same +option name as above but prepended with requested_ and with a value of 1, +or example requested_subnet_mask=1. No such variable is defined for +options not requested by the client or options that don't require a +request option, such as the ip address (*_ip_address) or expiration +time (*_expiry). +.PP +Before actually configuring the address, dhclient-script should +somehow ARP for it and exit with a nonzero status if it receives a +reply. In this case, the client will send a DHCPDECLINE message to +the server and acquire a different address. This may also be done in +the RENEW, REBIND, or REBOOT states, but is not required, and indeed +may not be desirable. +.PP +When a binding has been completed, a lot of network parameters are +likely to need to be set up. A new /etc/resolv.conf needs to be +created, using the values of $new_domain_name and +$new_domain_name_servers (which may list more than one server, +separated by spaces). A default route should be set using +$new_routers, and static routes may need to be set up using +$new_static_routes. +.PP +If an IP alias has been declared, it must be set up here. The alias +IP address will be written as $alias_ip_address, and other DHCP +options that are set for the alias (e.g., subnet mask) will be passed +in variables named as described previously except starting with +$alias_ instead of $new_. Care should be taken that the alias IP +address not be used if it is identical to the bound IP address +($new_ip_address), since the other alias parameters may be incorrect +in this case. +.SH RENEW +When a binding has been renewed, the script is called as in BOUND, +except that in addition to all the variables starting with $new_, and +$requested_ there is another set of variables starting with $old_. +Persistent settings that may have changed need to be deleted - for +example, if a local route to the bound address is being configured, +the old local route should be deleted. If the default route has changed, +the old default route should be deleted. If the static routes have changed, +the old ones should be deleted. Otherwise, processing can be done as with +BOUND. +.SH REBIND +The DHCP client has rebound to a new DHCP server. This can be handled +as with RENEW, except that if the IP address has changed, the ARP +table should be cleared. +.SH REBOOT +The DHCP client has successfully reacquired its old address after a +reboot. This can be processed as with BOUND. +.SH EXPIRE +The DHCP client has failed to renew its lease or acquire a new one, +and the lease has expired. The IP address must be relinquished, and +all related parameters should be deleted, as in RENEW and REBIND. +.SH FAIL +The DHCP client has been unable to contact any DHCP servers, and any +leases that have been tested have not proved to be valid. The +parameters from the last lease tested should be deconfigured. This +can be handled in the same way as EXPIRE. +.SH STOP +The dhclient has been informed to shut down gracefully, the +dhclient-script should unconfigure or shutdown the interface as +appropriate. +.SH RELEASE +The dhclient has been executed using the -r flag, indicating that the +administrator wishes it to release its lease(s). dhclient-script should +unconfigure or shutdown the interface. +.SH NBI +No-Broadcast-Interfaces...dhclient was unable to find any interfaces +upon which it believed it should commence DHCP. What dhclient-script +should do in this situation is entirely up to the implementor. +.SH TIMEOUT +The DHCP client has been unable to contact any DHCP servers. +However, an old lease has been identified, and its parameters have +been passed in as with BOUND. The client configuration script should +test these parameters and, if it has reason to believe they are valid, +should exit with a value of zero. If not, it should exit with a +nonzero value. +.PP +The usual way to test a lease is to set up the network as with REBIND +(since this may be called to test more than one lease) and then ping +the first router defined in $routers. If a response is received, the +lease must be valid for the network to which the interface is +currently connected. It would be more complete to try to ping all of +the routers listed in $new_routers, as well as those listed in +$new_static_routes, but current scripts do not do this. +.SH FILES +Each operating system should generally have its own script file, +although the script files for similar operating systems may be similar +or even identical. The script files included in Internet +Systems Consortium DHCP distribution appear in the distribution tree +under client/scripts, and bear the names of the operating systems on +which they are intended to work. +.SH BUGS +If more than one interface is being used, there's no obvious way to +avoid clashes between server-supplied configuration parameters - for +example, the stock dhclient-script rewrites /etc/resolv.conf. If +more than one interface is being configured, /etc/resolv.conf will be +repeatedly initialized to the values provided by one server, and then +the other. Assuming the information provided by both servers is +valid, this shouldn't cause any real problems, but it could be +confusing. +.SH SEE ALSO +dhclient(8), dhcpd(8), dhcrelay(8), dhclient.conf(5) and +dhclient.leases(5). +.SH AUTHOR +.B dhclient-script(8) +To learn more about Internet Systems Consortium, +see +.B https://www.isc.org. |