diff options
Diffstat (limited to 'doc/source/command-objects/subnet.rst')
| -rw-r--r-- | doc/source/command-objects/subnet.rst | 374 |
1 files changed, 0 insertions, 374 deletions
diff --git a/doc/source/command-objects/subnet.rst b/doc/source/command-objects/subnet.rst deleted file mode 100644 index 4e609361..00000000 --- a/doc/source/command-objects/subnet.rst +++ /dev/null @@ -1,374 +0,0 @@ -====== -subnet -====== - -A **subnet** is a block of IP addresses and associated configuration state. -Subnets are used to allocate IP addresses when new ports are created on a -network. - -Network v2 - -subnet create -------------- - -Create new subnet - -.. program:: subnet create -.. code:: bash - - openstack subnet create - [--project <project> [--project-domain <project-domain>]] - [--subnet-pool <subnet-pool> | --use-default-subnet-pool [--prefix-length <prefix-length>]] - [--subnet-range <subnet-range>] - [--allocation-pool start=<ip-address>,end=<ip-address>] - [--dhcp | --no-dhcp] - [--dns-nameserver <dns-nameserver>] - [--gateway <gateway>] - [--host-route destination=<subnet>,gateway=<ip-address>] - [--ip-version {4,6}] - [--description <description>] - [--ipv6-ra-mode {dhcpv6-stateful,dhcpv6-stateless,slaac}] - [--ipv6-address-mode {dhcpv6-stateful,dhcpv6-stateless,slaac}] - [--network-segment <network-segment>] - [--service-type <service-type>] - --network <network> - <name> - -.. option:: --project <project> - - Owner's project (name or ID) - -.. option:: --project-domain <project-domain> - - Domain the project belongs to (name or ID). - This can be used in case collisions between project names exist. - -.. option:: --subnet-pool <subnet-pool> - - Subnet pool from which this subnet will obtain a CIDR (name or ID) - -.. option:: --use-default-subnet-pool - - Use default subnet pool for :option:`--ip-version` - -.. option:: --prefix-length <prefix-length> - - Prefix length for subnet allocation from subnet pool - -.. option:: --subnet-range <subnet-range> - - Subnet range in CIDR notation - (required if :option:`--subnet-pool` is not specified, optional otherwise) - -.. option:: --allocation-pool start=<ip-address>,end=<ip-address> - - Allocation pool IP addresses for this subnet e.g.: - ``start=192.168.199.2,end=192.168.199.254`` - (repeat option to add multiple IP addresses) - -.. option:: --dhcp - - Enable DHCP (default) - -.. option:: --no-dhcp - - Disable DHCP - -.. option:: --dns-nameserver <dns-nameserver> - - DNS server for this subnet (repeat option to set multiple DNS servers) - -.. option:: --gateway <gateway> - - Specify a gateway for the subnet. The three options are: - <ip-address>: Specific IP address to use as the gateway, - 'auto': Gateway address should automatically be chosen from - within the subnet itself, 'none': This subnet will not use - a gateway, e.g.: ``--gateway 192.168.9.1``, ``--gateway auto``, - ``--gateway none`` (default is 'auto'). - -.. option:: --host-route destination=<subnet>,gateway=<ip-address> - - Additional route for this subnet e.g.: - ``destination=10.10.0.0/16,gateway=192.168.71.254`` - destination: destination subnet (in CIDR notation) - gateway: nexthop IP address - (repeat option to add multiple routes) - -.. option:: --ip-version {4,6} - - IP version (default is 4). Note that when subnet pool is specified, - IP version is determined from the subnet pool and this option - is ignored. - -.. option:: --description <description> - - Set subnet description - -.. option:: --ipv6-ra-mode {dhcpv6-stateful,dhcpv6-stateless,slaac} - - IPv6 RA (Router Advertisement) mode, - valid modes: [dhcpv6-stateful, dhcpv6-stateless, slaac] - -.. option:: --ipv6-address-mode {dhcpv6-stateful,dhcpv6-stateless,slaac} - - IPv6 address mode, valid modes: [dhcpv6-stateful, dhcpv6-stateless, slaac] - -.. option:: --network-segment <network-segment> - - Network segment to associate with this subnet (name or ID) - -.. option:: --service-type <service-type> - - Service type for this subnet e.g.: - ``network:floatingip_agent_gateway``. - Must be a valid device owner value for a network port - (repeat option to set multiple service types) - -.. option:: --network <network> - - Network this subnet belongs to (name or ID) - -.. _subnet_create-name: -.. describe:: <name> - - Name of subnet to create - -subnet delete -------------- - -Delete subnet(s) - -.. program:: subnet delete -.. code:: bash - - openstack subnet delete - <subnet> [<subnet> ...] - -.. _subnet_delete-subnet: -.. describe:: <subnet> - - Subnet(s) to delete (name or ID) - -subnet list ------------ - -List subnets - -.. program:: subnet list -.. code:: bash - - openstack subnet list - [--long] - [--ip-version {4,6}] - [--dhcp | --no-dhcp] - [--project <project> [--project-domain <project-domain>]] - [--network <network>] - [--gateway <gateway>] - [--name <name>] - [--subnet-range <subnet-range>] - -.. option:: --long - - List additional fields in output - -.. option:: --ip-version {4, 6} - - List only subnets of given IP version in output. - Allowed values for IP version are 4 and 6. - -.. option:: --dhcp - - List subnets which have DHCP enabled - -.. option:: --no-dhcp - - List subnets which have DHCP disabled - -.. option:: --service-type <service-type> - - List only subnets of a given service type in output - e.g.: ``network:floatingip_agent_gateway``. - Must be a valid device owner value for a network port - (repeat option to list multiple service types) - -.. option:: --project <project> - - List only subnets which belong to a given project in output (name or ID) - -.. option:: --project-domain <project-domain> - - Domain the project belongs to (name or ID). - This can be used in case collisions between project names exist. - -.. option:: --network <network> - - List only subnets which belong to a given network in output (name or ID) - -.. option:: --gateway <gateway> - - List only subnets of given gateway IP in output - -.. option:: --name <name> - - List only subnets of given name in output - -.. option:: --subnet-range <subnet-range> - - List only subnets of given subnet range (in CIDR notation) in output - e.g.: ``--subnet-range 10.10.0.0/16`` - -subnet set ----------- - -Set subnet properties - -.. program:: subnet set -.. code:: bash - - openstack subnet set - [--allocation-pool start=<ip-address>,end=<ip-address>] - [--no-allocation-pool] - [--dhcp | --no-dhcp] - [--dns-nameserver <dns-nameserver>] - [--no-dns-nameserver] - [--gateway <gateway-ip>] - [--host-route destination=<subnet>,gateway=<ip-address>] - [--no-host-route] - [--service-type <service-type>] - [--name <new-name>] - [--description <description>] - <subnet> - -.. option:: --allocation-pool start=<ip-address>,end=<ip-address> - - Allocation pool IP addresses for this subnet e.g.: - ``start=192.168.199.2,end=192.168.199.254`` - (repeat option to add multiple IP addresses) - -.. option:: --no-allocation-pool - - Clear associated allocation pools from this subnet. - Specify both :option:`--allocation-pool` and :option:`--no-allocation-pool` - to overwrite the current allocation pool information. - -.. option:: --dhcp - - Enable DHCP - -.. option:: --no-dhcp - - Disable DHCP - -.. option:: --dns-nameserver <dns-nameserver> - - DNS server for this subnet (repeat option to set multiple DNS servers) - -.. option:: --no-dns-nameservers - - Clear existing information of DNS servers. - Specify both :option:`--dns-nameserver` and :option:`--no-dns-nameservers` - to overwrite the current DNS server information. - -.. option:: --gateway <gateway> - - Specify a gateway for the subnet. The options are: - <ip-address>: Specific IP address to use as the gateway, - 'none': This subnet will not use a gateway, - e.g.: ``--gateway 192.168.9.1``, ``--gateway none``. - -.. option:: --host-route destination=<subnet>,gateway=<ip-address> - - Additional route for this subnet e.g.: - ``destination=10.10.0.0/16,gateway=192.168.71.254`` - destination: destination subnet (in CIDR notation) - gateway: nexthop IP address - -.. option:: --no-host-route - - Clear associated host routes from this subnet. - Specify both :option:`--host-route` and :option:`--no-host-route` - to overwrite the current host route information. - -.. option:: --service-type <service-type> - - Service type for this subnet e.g.: - ``network:floatingip_agent_gateway``. - Must be a valid device owner value for a network port - (repeat option to set multiple service types) - -.. option:: --description <description> - - Set subnet description - -.. option:: --name - - Updated name of the subnet - -.. _subnet_set-subnet: -.. describe:: <subnet> - - Subnet to modify (name or ID) - - -subnet show ------------ - -Display subnet details - -.. program:: subnet show -.. code:: bash - - openstack subnet show - <subnet> - -.. _subnet_show-subnet: -.. describe:: <subnet> - - Subnet to display (name or ID) - -subnet unset ------------- - -Unset subnet properties - -.. program:: subnet unset -.. code:: bash - - openstack subnet unset - [--allocation-pool start=<ip-address>,end=<ip-address> [...]] - [--dns-nameserver <dns-nameserver> [...]] - [--host-route destination=<subnet>,gateway=<ip-address> [...]] - [--service-type <service-type>] - <subnet> - -.. option:: --dns-nameserver <dns-nameserver> - - DNS server to be removed from this subnet - (repeat option to unset multiple DNS servers) - -.. option:: --allocation-pool start=<ip-address>,end=<ip-address> - - Allocation pool IP addresses to be removed from this - subnet e.g.: ``start=192.168.199.2,end=192.168.199.254`` - (repeat option to unset multiple allocation pools) - -.. option:: --host-route destination=<subnet>,gateway=<ip-address> - - Route to be removed from this subnet e.g.: - ``destination=10.10.0.0/16,gateway=192.168.71.254`` - destination: destination subnet (in CIDR notation) - gateway: nexthop IP address - (repeat option to unset multiple host routes) - -.. option:: --service-type <service-type> - - Service type to be removed from this subnet e.g.: - ``network:floatingip_agent_gateway``. - Must be a valid device owner value for a network port - (repeat option to unset multiple service types) - -.. _subnet_unset-subnet: -.. describe:: <subnet> - - Subnet to modify (name or ID) |