Update from trunk r1375509 through r1450773asyncstore

git-svn-id: https://svn.apache.org/repos/asf/qpid/branches/asyncstore@1451244 13f79535-47bb-0310-9956-ffa450edef68

1 files changed, 176 insertions, 140 deletions

diff --git a/cpp/BuildInstallSettings.cmake b/cpp/BuildInstallSettings.cmake
index 3da1d89bfe..dfa88022d9 100644
--- a/cpp/BuildInstallSettings.cmake
+++ b/cpp/BuildInstallSettings.cmake
@@ -1,25 +1,25 @@
-#

-# Licensed to the Apache Software Foundation (ASF) under one

-# or more contributor license agreements.  See the NOTICE file

-# distributed with this work for additional information

-# regarding copyright ownership.  The ASF licenses this file

-# to you under the Apache License, Version 2.0 (the

-# "License"); you may not use this file except in compliance

-# with the License.  You may obtain a copy of the License at

-#

-#   http://www.apache.org/licenses/LICENSE-2.0

-#

-# Unless required by applicable law or agreed to in writing,

-# software distributed under the License is distributed on an

-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY

-# KIND, either express or implied.  See the License for the

-# specific language governing permissions and limitations

-# under the License.

-#

-

-# Settings related to the Qpid build and install CMake/CTest/CPack procedure.

-# These are used by both the C++ and WCF components.

-

+#
+# Licensed to the Apache Software Foundation (ASF) under one
+# or more contributor license agreements.  See the NOTICE file
+# distributed with this work for additional information
+# regarding copyright ownership.  The ASF licenses this file
+# to you under the Apache License, Version 2.0 (the
+# "License"); you may not use this file except in compliance
+# with the License.  You may obtain a copy of the License at
+#
+#   http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing,
+# software distributed under the License is distributed on an
+# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
+# KIND, either express or implied.  See the License for the
+# specific language governing permissions and limitations
+# under the License.
+#
+
+# Settings related to the Qpid build and install CMake/CTest/CPack procedure.
+# These are used by both the C++ and WCF components.
+
 # Parse the version from QPID_VERSION.txt.
 # Use the top level qpid/ file if we're in an SVN checkout, source dir otherwise.
 if(EXISTS "${PROJECT_SOURCE_DIR}/../QPID_VERSION.txt")
@@ -31,121 +31,157 @@ else()
 endif(EXISTS "${PROJECT_SOURCE_DIR}/../QPID_VERSION.txt")
 string(REGEX REPLACE "^([0-9]+)\\.([0-9]+)\n" "\\1" QPID_VERSION_MAJOR "${QPID_VERSION}")
 string(REGEX REPLACE "^([0-9]+)\\.([0-9]+)\n" "\\2" QPID_VERSION_MINOR "${QPID_VERSION}")
-

-# When doing installs, there are a number of components that the item can

-# be associated with. Since there may be different sets of components desired

-# for the various platforms, the component names are defined here. When

-# setting the COMPONENT in an install directive, use these to ensure that

-# the item is installed correctly.

-

-if (WIN32)

-  # Install types; these defines the component sets that are installed.

-  # Each component (below) indicates which of these install type(s) it is

-  # included in. The user can refine the components at install time.

-  set (CPACK_ALL_INSTALL_TYPES Broker Development Full)

-

-  set (QPID_COMPONENT_COMMON Common)

-  set (CPACK_COMPONENT_COMMON_INSTALL_TYPES Broker Development Full)

-  set (CPACK_COMPONENT_COMMON_DISPLAY_NAME "Required common runtime items")

-  set (CPACK_COMPONENT_COMMON_DESCRIPTION

-       "Run-time library common to all runtime components in Qpid.\nThis item is required by both broker and client components.")

-

-  set (QPID_COMPONENT_BROKER Broker)

-  set (CPACK_COMPONENT_BROKER_DEPENDS Common)

-  set (CPACK_COMPONENT_BROKER_INSTALL_TYPES Broker Full)

-  set (CPACK_COMPONENT_BROKER_DISPLAY_NAME "Broker")

-  set (CPACK_COMPONENT_BROKER_DESCRIPTION

-       "Messaging broker; controls message flow within the system.\nAt least one broker is required to run any messaging application.")

-

-  set (QPID_COMPONENT_CLIENT Client)

-  set (CPACK_COMPONENT_CLIENT_DEPENDS Common)

-  set (CPACK_COMPONENT_CLIENT_INSTALL_TYPES Development Full)

-  set (CPACK_COMPONENT_CLIENT_DISPLAY_NAME "Client runtime libraries")

-  set (CPACK_COMPONENT_CLIENT_DESCRIPTION

-       "Runtime library components required to build and execute a client application.")

-

-  set (QPID_COMPONENT_CLIENT_INCLUDE ClientInclude)

-  set (CPACK_COMPONENT_CLIENTINCLUDE_INSTALL_TYPES Development Full)

-  set (CPACK_COMPONENT_CLIENTINCLUDE_DISPLAY_NAME

-       "Client programming header files")

-  set (CPACK_COMPONENT_CLIENTINCLUDE_DESCRIPTION

-       "C++ header files required to build any Qpid messaging application.")

-

-  set (QPID_COMPONENT_EXAMPLES Examples)

-  set (CPACK_COMPONENT_EXAMPLES_INSTALL_TYPES Development Full)

-  set (CPACK_COMPONENT_EXAMPLES_DISPLAY_NAME "C++ Client programming examples")

-  set (CPACK_COMPONENT_EXAMPLES_DESCRIPTION

-       "Example source code for using the C++ Client.")

-

-  set (QPID_COMPONENT_QMF QMF)

-  set (CPACK_COMPONENT_QMF_INSTALL_TYPES Development Full)

-  set (CPACK_COMPONENT_QMF_DISPLAY_NAME

-       "Qpid Management Framework (QMF)")

-  set (CPACK_COMPONENT_QMF_DESCRIPTION

-       "QMF Agent allows you to embed QMF management in your program.\nQMF Console allows you to build management programs using QMF.")

-

-  set (QPID_INSTALL_BINDIR bin CACHE STRING

-       "Directory to install user executables")

-  set (QPID_INSTALL_CONFDIR conf CACHE STRING

-       "Directory to install configuration files")

-  set (QPID_INSTALL_SASLDIR conf CACHE STRING

-       "Directory to install SASL configuration files")

-  set (QPID_INSTALL_DATADIR conf CACHE STRING

-       "Directory to install read-only arch.-independent data root")

-  set (QPID_INSTALL_EXAMPLESDIR examples CACHE STRING

-       "Directory to install programming examples in")

-  set (QPID_INSTALL_HTMLDIR docs/api/html CACHE STRING

-       "Directory to install HTML documentation")

-  set (QPID_INSTALL_INCLUDEDIR include CACHE STRING

-       "Directory to install programming header files")

-  set (QPID_INSTALL_LIBDIR bin CACHE STRING

-       "Directory to install library files")

-  set (QPID_INSTALL_SBINDIR bin CACHE STRING

-       "Directory to install system admin executables")

-  set (QPIDC_MODULE_DIR plugins/client CACHE STRING

-       "Directory to load client plug-in modules from")

-  set (QPIDD_MODULE_DIR plugins/broker CACHE STRING

-       "Directory to load broker plug-in modules from")

-endif (WIN32)

-

-if (UNIX)

-  set (QPID_COMPONENT_BROKER runtime)

-  set (QPID_COMPONENT_CLIENT runtime)

-  set (QPID_COMPONENT_COMMON runtime)

-  set (CPACK_COMPONENT_RUNTIME_DISPLAY_NAME

-       "Items required to run broker and/or client programs")

-  set (QPID_COMPONENT_CLIENT_INCLUDE development)

-  set (QPID_COMPONENT_EXAMPLES development)

-  set (QPID_COMPONENT_QMF development)

-  set (CPACK_COMPONENT_DEVELOPMENT_DISPLAY_NAME

-       "Items required to build new C++ Qpid client programs")

-

-  set (QPID_INSTALL_BINDIR bin CACHE STRING

-       "Directory to install user executables")

-  set (QPID_INSTALL_CONFDIR etc/qpid CACHE STRING

-       "Directory to install configuration files")

-  set (QPID_INSTALL_DATADIR share/qpid CACHE STRING

-       "Directory to install read-only arch.-independent data root")

-  set (QPID_INSTALL_SASLDIR etc/sasl2 CACHE STRING

-       "Directory to install SASL configuration files")

-  set (QPID_INSTALL_EXAMPLESDIR share/examples CACHE STRING

-       "Directory to install programming examples in")

-  set (QPID_INSTALL_HTMLDIR html CACHE STRING

-       "Directory to install HTML documentation")

-  set (QPID_INSTALL_INCLUDEDIR include CACHE STRING

-       "Directory to install programming header files")

-  set (QPID_INSTALL_LIBDIR lib CACHE STRING

-       "Directory to install library files")

-  set (QPID_INSTALL_SBINDIR sbin CACHE STRING

-       "Directory to install system admin executables")

-  set (QPIDC_MODULE_DIR ${QPID_INSTALL_LIBDIR}/qpid/client CACHE STRING

-       "Directory to load client plug-in modules from")

-  set (QPIDD_MODULE_DIR ${QPID_INSTALL_LIBDIR}/qpid/daemon CACHE STRING

-       "Directory to load broker plug-in modules from")

-  set (QPID_LIBEXEC_DIR libexec/qpid CACHE STRING

-       "Directory for executables used by qpid libs")

-  set (QPID_LOCALSTATE_DIR var CACHE STRING
-       "Directory to store local state data")
-  set (QPID_MAN_DIR man CACHE STRING
-       "Directory to install manual files")
-endif (UNIX)

+set (QPID_VERSION_FULL "${QPID_VERSION_MAJOR}.${QPID_VERSION_MINOR}")
+
+# When doing installs, there are a number of components that the item can
+# be associated with. Since there may be different sets of components desired
+# for the various platforms, the component names are defined here. When
+# setting the COMPONENT in an install directive, use these to ensure that
+# the item is installed correctly.
+
+if (WIN32)
+  # Install types; these defines the component sets that are installed.
+  # Each component (below) indicates which of these install type(s) it is
+  # included in. The user can refine the components at install time.
+  set (CPACK_ALL_INSTALL_TYPES Broker Development Full)
+
+  set (QPID_COMPONENT_COMMON Common)
+  set (CPACK_COMPONENT_COMMON_INSTALL_TYPES Broker Development Full)
+  set (CPACK_COMPONENT_COMMON_DISPLAY_NAME "Required common runtime items")
+  set (CPACK_COMPONENT_COMMON_DESCRIPTION
+       "Run-time library common to all runtime components in Qpid.\nThis item is required by both broker and client components.")
+
+  set (QPID_COMPONENT_BROKER Broker)
+  set (CPACK_COMPONENT_BROKER_DEPENDS Common)
+  set (CPACK_COMPONENT_BROKER_INSTALL_TYPES Broker Full)
+  set (CPACK_COMPONENT_BROKER_DISPLAY_NAME "Broker")
+  set (CPACK_COMPONENT_BROKER_DESCRIPTION
+       "Messaging broker; controls message flow within the system.\nAt least one broker is required to run any messaging application.")
+
+  set (QPID_COMPONENT_CLIENT Client)
+  set (CPACK_COMPONENT_CLIENT_DEPENDS Common)
+  set (CPACK_COMPONENT_CLIENT_INSTALL_TYPES Development Full)
+  set (CPACK_COMPONENT_CLIENT_DISPLAY_NAME "Client runtime libraries")
+  set (CPACK_COMPONENT_CLIENT_DESCRIPTION
+       "Runtime library components required to build and execute a client application.")
+
+  set (QPID_COMPONENT_CLIENT_INCLUDE ClientInclude)
+  set (CPACK_COMPONENT_CLIENTINCLUDE_INSTALL_TYPES Development Full)
+  set (CPACK_COMPONENT_CLIENTINCLUDE_DISPLAY_NAME
+       "Client programming header files")
+  set (CPACK_COMPONENT_CLIENTINCLUDE_DESCRIPTION
+       "C++ header files required to build any Qpid messaging application.")
+
+  set (QPID_COMPONENT_EXAMPLES Examples)
+  set (CPACK_COMPONENT_EXAMPLES_INSTALL_TYPES Development Full)
+  set (CPACK_COMPONENT_EXAMPLES_DISPLAY_NAME "C++ Client programming examples")
+  set (CPACK_COMPONENT_EXAMPLES_DESCRIPTION
+       "Example source code for using the C++ Client.")
+
+  set (QPID_COMPONENT_QMF QMF)
+  set (CPACK_COMPONENT_QMF_INSTALL_TYPES Development Full)
+  set (CPACK_COMPONENT_QMF_DISPLAY_NAME
+       "Qpid Management Framework (QMF)")
+  set (CPACK_COMPONENT_QMF_DESCRIPTION
+       "QMF Agent allows you to embed QMF management in your program.\nQMF Console allows you to build management programs using QMF.")
+
+  set (QPID_INSTALL_BINDIR bin CACHE STRING
+       "Directory to install user executables")
+  set (QPID_INSTALL_CONFDIR conf CACHE STRING
+       "Directory to install configuration files")
+  set (QPID_INSTALL_SASLDIR conf CACHE STRING
+       "Directory to install SASL configuration files")
+  set (QPID_INSTALL_DATADIR conf CACHE STRING
+       "Directory to install read-only arch.-independent data root")
+  set (QPID_INSTALL_EXAMPLESDIR examples CACHE STRING
+       "Directory to install programming examples in")
+  set (QPID_INSTALL_DOCDIR docs CACHE STRING
+       "Directory to install documentation")
+  set (QPID_INSTALL_INCLUDEDIR include CACHE STRING
+       "Directory to install programming header files")
+  set (QPID_INSTALL_LIBDIR bin CACHE STRING
+       "Directory to install library files")
+  set (QPID_INSTALL_SBINDIR bin CACHE STRING
+       "Directory to install system admin executables")
+  set (QPID_INSTALL_TESTDIR bin CACHE STRING
+       "Directory for test executables")
+  set (QPIDC_MODULE_DIR plugins/client CACHE STRING
+       "Directory to load client plug-in modules from")
+  set (QPIDD_MODULE_DIR plugins/broker CACHE STRING
+       "Directory to load broker plug-in modules from")
+
+# function to get absolute path from a variable that may be relative to the
+# install prefix - For Windows we can never know the absolute install prefix
+# as this is decided at install time so this just returns the input path
+  function(set_absolute_install_path var input)
+    set (${var} ${input} PARENT_SCOPE)
+  endfunction(set_absolute_install_path)
+
+  set (INCLUDE_INSTALL_DIR ${QPID_INSTALL_INCLUDEDIR})
+  set (LIB_INSTALL_DIR ${QPID_INSTALL_INCLUDEDIR})
+endif (WIN32)
+
+if (UNIX)
+# function to get absolute path from a variable that may be relative to the
+# install prefix
+function(set_absolute_install_path var input)
+  if (${input} MATCHES "^/.*")
+    set (${var} ${input} PARENT_SCOPE)
+  else ()
+    set (${var} ${CMAKE_INSTALL_PREFIX}/${input} PARENT_SCOPE)
+  endif ()
+endfunction(set_absolute_install_path)
+
+# Figure out the default library suffix
+if (NOT DEFINED LIB_SUFFIX)
+    get_property(LIB64 GLOBAL PROPERTY FIND_LIBRARY_USE_LIB64_PATHS)
+    if (${LIB64} STREQUAL "TRUE" AND ${CMAKE_SIZEOF_VOID_P} STREQUAL "8")
+        set(LIB_SUFFIX 64)
+    else()
+        set(LIB_SUFFIX "")
+    endif()
+endif()
+
+# In rpm builds the build sets some variables:
+#  CMAKE_INSTALL_PREFIX - this is a standard cmake variable
+#  INCLUDE_INSTALL_DIR
+#  LIB_INSTALL_DIR
+#  SYSCONF_INSTALL_DIR
+#  SHARE_INSTALL_DIR
+# So make these cached variables and the specific variables non cached and
+# derived from them.
+  set (INCLUDE_INSTALL_DIR include CACHE PATH "Include file directory")
+  set (LIB_INSTALL_DIR lib${LIB_SUFFIX} CACHE PATH "Library object file directory")
+  set (SYSCONF_INSTALL_DIR etc CACHE PATH "System read only configuration directory")
+  set (SHARE_INSTALL_DIR share CACHE PATH "Shared read only data directory")
+  set (DOC_INSTALL_DIR ${SHARE_INSTALL_DIR}/doc/${CMAKE_PROJECT_NAME}-${QPID_VERSION_FULL} CACHE PATH "Shared read only data directory")
+  
+  set (QPID_COMPONENT_BROKER runtime)
+  set (QPID_COMPONENT_CLIENT runtime)
+  set (QPID_COMPONENT_COMMON runtime)
+  set (CPACK_COMPONENT_RUNTIME_DISPLAY_NAME
+       "Items required to run broker and/or client programs")
+  set (QPID_COMPONENT_CLIENT_INCLUDE development)
+  set (QPID_COMPONENT_EXAMPLES development)
+  set (QPID_COMPONENT_QMF development)
+  set (CPACK_COMPONENT_DEVELOPMENT_DISPLAY_NAME
+       "Items required to build new C++ Qpid client programs")
+
+  # These are always relative to $CMAKE_INSTALL_PREFIX
+  set (QPID_INSTALL_BINDIR bin)
+  set (QPID_INSTALL_SBINDIR sbin)
+  set (QPID_INSTALL_TESTDIR libexec/qpid/tests) # Directory for test executables
+  set (QPID_INSTALL_CONFDIR ${SYSCONF_INSTALL_DIR}/qpid)
+  set (QPID_INSTALL_SASLDIR ${SYSCONF_INSTALL_DIR}/sasl2)
+  set (QPID_INSTALL_DATADIR ${SHARE_INSTALL_DIR}/qpid)
+  set (QPID_INSTALL_EXAMPLESDIR ${SHARE_INSTALL_DIR}/examples)
+  set (QPID_INSTALL_DOCDIR ${DOC_INSTALL_DIR}) # Directory to install documentation
+  set (QPID_INSTALL_INCLUDEDIR ${INCLUDE_INSTALL_DIR})
+  set (QPID_INSTALL_LIBDIR ${LIB_INSTALL_DIR})
+  set (QPID_LOCALSTATE_DIR var) # Directory to store local state data
+  set (QPID_MAN_DIR man) # Directory to install manual files
+  set (QPID_INSTALL_SYSTEMDDIR usr/lib/systemd/system) # Systemd service files
+
+  set_absolute_install_path (QPIDC_MODULE_DIR ${QPID_INSTALL_LIBDIR}/qpid/client) # Directory to load client plug-in modules from
+  set_absolute_install_path (QPIDD_MODULE_DIR ${QPID_INSTALL_LIBDIR}/qpid/daemon) # Directory to load broker plug-in modules from
+endif (UNIX)