Undo bad merge from trunk - merged at wrong level.

git-svn-id: https://svn.apache.org/repos/asf/qpid/branches/QPID-2519@1187150 13f79535-47bb-0310-9956-ffa450edef68

1 files changed, 0 insertions, 150 deletions

diff --git a/cpp/src/tests/ipv6_test b/cpp/src/tests/ipv6_test
deleted file mode 100755
index d75d50fd0a..0000000000
--- a/cpp/src/tests/ipv6_test
+++ /dev/null
@@ -1,150 +0,0 @@
-#!/bin/bash
-
-#
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements.  See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership.  The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License.  You may obtain a copy of the License at
-#
-#   http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied.  See the License for the
-# specific language governing permissions and limitations
-# under the License.
-#
-
-# Run a simple test over IPv6
-source ./test_env.sh
-
-CONFIG=$(dirname $0)/config.null
-TEST_HOSTNAME=::1
-COUNT=10
-
-trap cleanup EXIT
-
-error() { echo $*; exit 1; }
-
-# Don't need --no-module-dir or --no-data-dir as they are set as env vars in test_env.sh
-COMMON_OPTS="--daemon --auth no --config $CONFIG"
-
-# Record all broker ports started
-unset PORTS
-declare -a PORTS
-
-# Start new brokers:
-#   $1 must be integer
-#   $2 = extra opts
-# Append used ports to PORTS variable
-start_brokers() {
-    local -a ports
-    for (( i=0; $i<$1; i++)) do
-        ports[$i]=$($QPIDD_EXEC --port 0 $COMMON_OPTS $2)
-    done
-    PORTS=( ${PORTS[@]} ${ports[@]} )
-}
-
-stop_brokers() {
-    for port in "${PORTS[@]}";
-    do
-        $QPIDD_EXEC -qp $port
-    done
-    PORTS=()
-}
-
-cleanup() {
-    stop_brokers
-}
-
-start_brokers 1
-PORT=${PORTS[0]}
-echo "Started IPv6 smoke perftest on broker port $PORT"
-
-## Test connection via connection settings
-./qpid-perftest --count ${COUNT} --port ${PORT} -b $TEST_HOSTNAME --summary
-
-## Test connection with a URL
-URL="amqp:[$TEST_HOSTNAME]:$PORT"
-
-./qpid-send -b $URL --content-string=hello -a "foo;{create:always}"
-MSG=`./qpid-receive -b $URL -a "foo;{create:always}" --messages 1`
-test "$MSG" = "hello" || { echo "receive failed '$MSG' != 'hello'"; exit 1; }
-
-stop_brokers
-
-# Federation smoke test follows
-
-# Start 2 brokers
-
-# In a distribution, the python tools will be absent.
-if [ ! -f $QPID_CONFIG_EXEC ] || [ ! -f $QPID_ROUTE_EXEC ] ; then
-    echo "python tools absent - skipping federation test."
-else
-
-    start_brokers 2
-    echo "Started Federated brokers on ports ${PORTS[*]}"
-    # Make broker urls
-    BROKER0="[::1]:${PORTS[0]}"
-    BROKER1="[::1]:${PORTS[1]}"
-    TEST_QUEUE=ipv6-fed-test
-
-    $QPID_CONFIG_EXEC -a $BROKER0 add queue $TEST_QUEUE
-    $QPID_CONFIG_EXEC -a $BROKER1 add queue $TEST_QUEUE
-    $QPID_ROUTE_EXEC dynamic add $BROKER1 $BROKER0 amq.direct
-    $QPID_CONFIG_EXEC -a $BROKER1 bind amq.direct $TEST_QUEUE $TEST_QUEUE
-    $QPID_ROUTE_EXEC route map $BROKER1
-
-    ./datagen --count 100 | tee rdata-in |
-        ./qpid-send -b amqp:$BROKER0 -a amq.direct/$TEST_QUEUE --content-stdin
-    ./qpid-receive -b amqp:$BROKER1 -a $TEST_QUEUE --print-content yes -m 0 > rdata-out
-
-    cmp rdata-in rdata-out || { echo "Federated data over IPv6 does not compare"; exit 1; }
-
-    stop_brokers
-    rm rdata-in rdata-out
-fi
-
-# Cluster smoke test follows
-test -z $CLUSTER_LIB && exit 0	# Exit if cluster not supported.
-
-## Test failover in a cluster using IPv6 only
-. $srcdir/ais_check		# Will exit if clustering not enabled.
-
-pick_port() {
-    # We need a fixed port to set --cluster-url. Use qpidd to pick a free port.
-    # Note this method is racy
-    PICK=$($QPIDD_EXEC -dp0)
-    $QPIDD_EXEC -qp $PICK
-    echo $PICK
-}
-
-ssl_cluster_broker() {		# $1 = port
-    $QPIDD_EXEC $COMMON_OPTS --load-module  $CLUSTER_LIB --cluster-name ipv6_test.$HOSTNAME.$$ --cluster-url amqp:[$TEST_HOSTNAME]:$1 --port $1
-    # Wait for broker to be ready
-    ./qpid-ping -b $TEST_HOSTNAME -qp $1 || { echo "Cannot connect to broker on $1"; exit 1; }
-    echo "Running IPv6 cluster broker on port $1"
-}
-
-PORT1=`pick_port`; ssl_cluster_broker $PORT1
-PORT2=`pick_port`; ssl_cluster_broker $PORT2
-
-# Pipe receive output to uniq to remove duplicates
-./qpid-receive --connection-options "{reconnect:true, reconnect-timeout:5}" --failover-updates -b amqp:[$TEST_HOSTNAME]:$PORT1 -a "foo;{create:always}" -f | uniq > ssl_test_receive.tmp &
-
-./qpid-send -b amqp:[$TEST_HOSTNAME]:$PORT2 --content-string=one -a "foo;{create:always}"
-
-$QPIDD_EXEC -qp $PORT1 # Kill broker 1 receiver should fail-over.
-./qpid-send -b amqp:[$TEST_HOSTNAME]:$PORT2 --content-string=two -a "foo;{create:always}" --send-eos 1
-wait				# Wait for qpid-receive
-{ echo one; echo two; } > ssl_test_receive.cmp
-diff  ssl_test_receive.tmp ssl_test_receive.cmp || { echo "Failover failed"; exit 1; }
-
-$QPIDD_EXEC -qp $PORT2
-
-rm -f ssl_test_receive.*
-