diff options
Diffstat (limited to 'cpp/bindings/qpid/dotnet/configure-windows.ps1')
| -rw-r--r-- | cpp/bindings/qpid/dotnet/configure-windows.ps1 | 522 |
1 files changed, 0 insertions, 522 deletions
diff --git a/cpp/bindings/qpid/dotnet/configure-windows.ps1 b/cpp/bindings/qpid/dotnet/configure-windows.ps1 deleted file mode 100644 index 34395911b9..0000000000 --- a/cpp/bindings/qpid/dotnet/configure-windows.ps1 +++ /dev/null @@ -1,522 +0,0 @@ -#
-# Licensed to the Apache Software Foundation (ASF) under one
-# or more contributor license agreements. See the NOTICE file
-# distributed with this work for additional information
-# regarding copyright ownership. The ASF licenses this file
-# to you under the Apache License, Version 2.0 (the
-# "License"); you may not use this file except in compliance
-# with the License. You may obtain a copy of the License at
-#
-# http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing,
-# software distributed under the License is distributed on an
-# "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY
-# KIND, either express or implied. See the License for the
-# specific language governing permissions and limitations
-# under the License.
-#
-
-#
-# configure-windows.ps1
-# =====================
-#
-# This script configures a qpid\cpp developer build environment under Windows
-# to enable working with cpp\bindings\qpid\dotnet binding source code.
-#
-# * Supports 32-bit and/or 64-bit development platforms.
-#
-# * User chooses in-source or out-of-source build directories.
-#
-# - 'In-source' builds happen when CMake is run from directory qpid\cpp.
-# Hundreds of CMake-generated output files are placed in qpid\cpp\src.
-# These files go right on top of files that are part of the source tree
-# in qpid\cpp\src.
-# In-source builds support only one platform.
-# Choose only a 32-bit or a 64-bit platform but not both.
-#
-# - Out-of-source builds happen when the user chooses another directory
-# under qpid in which to run CMake. Out-of-source builds are required
-# in order to build both x86 and x64 targets using the same source tree.
-# For each build platform (32-bit x86 or Win32, or 64-bit x64) the user
-# specifies a build directory and a specific version of Boost.
-# Many platform/Boost-version directories may reside side by side.
-#
-# * User chooses to run CMake or not.
-#
-# - When a new build directory is created then the user is given the
-# option of running CMake in that directory. Running CMake is a
-# necessary step as CMake creates important source, solution, and
-# project files.
-#
-# - If a directory "looks like" is has already had CMake run in it
-# then this script skips running CMake again.
-#
-#
-# Prerequisites
-#
-# 1. Powershell must be installed.
-# 2. 32-bit and/or 64-bit Boost libraries must be installed in separate
-# directories. A user system may have any number of Boost library
-# versions installed on it as long as each may be referred to through
-# a separate BOOST_ROOT directory path.
-# 3. CMake 2.8 (or later) must be installed. The cmake\bin directory
-# must be in the user's path.
-# 4. Boost library specifications may or may not be in the user's path.
-# The script author recommeds not to have Boost in the path and only
-# allow the Boost path to be specified by generated command procedures.
-# 5. Visual Studio build environment must be installed.
-#
-#
-# Use case: Create a new build environment
-# ========================================
-#
-# Required Boost:
-# 32-bit library - C:\Boost
-# 64-bit library - D:\Boost_64
-#
-# Required Qpid checkout tree
-# C:\svn\qpid\...
-#
-# Run this script. It will ask for four directories:
-#
-# Needed info User clicks on or adds new
-# ---------------- --------------------------
-# 32-bit Boost C:\boost
-# 32-bit build dir C:\svn\qpid\build32
-# 64-bit Boost D:\Boost_64
-# 64-bit build dir C:\svn\qpid\build64
-#
-# In this example the build dirs are new. The script will prompt
-# asking if CMake is to run in the build directories. User chooses Yes.
-#
-# Now this script runs CMake twice, once each with the 32-bit and 64-bit
-# generators.
-# * This step creates qpid-cpp.sln and related project files.
-# C:\svn\qpid\build32\qpid-cpp.sln
-# C:\svn\qpid\build64\qpid-cpp.sln
-#
-# This script generates other scripts as follows:
-#
-# C:\svn\qpid\build32\start-devenv-messaging-x86-32bit.ps1
-# C:\svn\qpid\build32\start-devenv-messaging-x86-32bit.bat
-# C:\svn\qpid\build32\setenv-messaging-x86-32bit.bat
-#
-# C:\svn\qpid\build64\start-devenv-messaging-x64-64bit.ps1
-# C:\svn\qpid\build64\start-devenv-messaging-x64-64bit.bat
-# C:\svn\qpid\build64\setenv-messaging-x64-64bit.bat
-#
-# Next the user compiles solution qpid\build32\qpid-cpp.sln.
-#
-# Using the generated scripts:
-#
-# Case 1. Run an executable in 32-bit mode.
-# 1. Open a command prompt.
-# 2. > CD c:\svn\qpid\build32
-# 3. > CALL setenv-messaging-x86-32bit.bat
-# 4. > CD src\debug
-# 5. > run the chosen program
-#
-# Note: Step #3 adds Boost to the user's path. This script selects the
-# version of Boost to match the executables in src\debug.
-#
-# Case 2. Launch Visual Studio org.apache.qpid.messaging.sln in 64-bit mode.
-# 1. > CD c:\svn\qpid\build64
-# 2. > powershell start-devenv-messaging-x64-64bit.ps1
-# or
-# 1. Double-click c:\svn\qpid\build64\start-devenv-messaging-x64-64bit.bat
-#
-# Note: In this case the scripts set QPID_BUILD_ROOT to point to the out-of-
-# source directory used by qpid-cpp.sln. Also the scripts put Boost in
-# the path so that executables may run directly from Visual Studio.
-#
-
-Set-PSDebug -Trace 0
-Set-PSDebug -strict
-$ErrorActionPreference='Stop'
-
-#############################
-# global strings to be written to script files
-#
-$global:txtPath = '$env:PATH'
-$global:txtQR = '$env:QPID_BUILD_ROOT'
-$global:txtWH = 'Write-Host'
-
-
-#############################
-# Select-Folder
-# Return a folder or null
-#
-function Select-Folder ($message="Select a folder", $path=0)
-{
- $shellApp = New-Object -comObject Shell.Application
- $folder = $shellApp.BrowseForFolder(0, $message, 0, $path)
- if ($folder -ne $null) {
- $folder.self.Path
- }
-}
-
-
-#############################
-# AskYesOrNo
-# Show modal dialog messagebox and return yes or no
-#
-function AskYesOrNo ($Question="No question?", $Title="No Title?")
-{
- $dlg = [Windows.Forms.MessageBox]::Show($Question, $Title, `
- [Windows.Forms.MessageBoxButtons]::YesNo, `
- [Windows.Forms.MessageBoxIcon]::Question)
-
- $result = $dlg -eq [Windows.Forms.DialogResult]::Yes
-
- $result
-}
-
-
-#############################
-# SanityCheckBoostPath
-# A path is a "boost path" if it contains
-# both lib and include subdirectories.
-#
-function SanityCheckBoostPath ($path=0)
-{
- $result = $true
- $displayPath = ""
-
- if ($path -ne $null) {
- $displayPath = $path
-
- $toTest = ('include', 'lib')
- foreach ($pattern in $toTest) {
- $target = Join-Path $path $pattern
- if (!(Test-Path -path $target)) {
- $result = $false
- }
- }
- } else {
- $result = $false
- }
-
- if (! $result) {
- Write-Host "The path ""$displayPath"" does not appear to be a Boost root path."
- }
- $result
-}
-
-
-#############################
-# SanityCheckBuildPath
-# A path is a "build path" if it contains
-# various subdirectories.
-#
-function SanityCheckBuildPath ($path=0)
-{
- $result = $true
- $displayPath = ""
- if ($path -ne $null) {
- $displayPath = $path
-
- $toTest = ('CMakeFiles', 'docs', 'etc', 'examples', 'include',
- 'managementgen', 'src')
- foreach ($pattern in $toTest) {
- $target = Join-Path $path $pattern
- if (!(Test-Path -path $target)) {
- $result = $false
- }
- }
- } else {
- $result = $false
- }
- if (! $result) {
- Write-Host "The path ""$displayPath"" does not appear to be a Qpid C++ build root path."
- }
- $result
-}
-
-
-#############################
-# WriteDotnetBindingSlnLauncherPs1
-# Write a powershell script that sets up the environment
-# and then launches Visual Studio solution file.
-#
-function WriteDotnetBindingSlnLauncherPs1
-{
- param
- (
- [string] $slnName,
- [string] $boostRoot,
- [string] $buildRoot,
- [string] $cppDir,
- [string] $vsPlatform,
- [string] $nBits,
- [string] $outfileName
- )
-
- $out = @("#
-# Launch $slnName in Visual Studio $vsPlatform ($nBits-bit) environment
-#
-$global:txtPath = ""$boostRoot\lib;$global:txtPath""
-$global:txtQR = ""$buildRoot""
-$global:txtWH ""Launch $slnName in Visual Studio $vsPlatform ($nBits-bit) environment.""
-$cppDir\bindings\qpid\dotnet\$slnName
-")
- Write-Host " $buildRoot\$outfileName"
- $out | Out-File "$buildRoot\$outfileName" -encoding ASCII
-}
-
-
-#############################
-# WriteDotnetBindingSlnLauncherBat
-# Write a batch file that
-# launches a powershell script.
-#
-function WriteDotnetBindingSlnLauncherBat
-{
- param
- (
- [string] $slnName,
- [string] $buildRoot,
- [string] $vsPlatform,
- [string] $nBits,
- [string] $psScriptName,
- [string] $outfileName
- )
-
- $out = @("@ECHO OFF
-REM
-REM Launch $slnName in Visual Studio $vsPlatform ($nBits-bit) environment
-REM
-ECHO Launch $slnName in Visual Studio $vsPlatform ($nBits-bit) environment
-powershell $buildRoot\$psScriptName
-")
- Write-Host " $buildRoot\$outfileName"
- $out | Out-File "$buildRoot\$outfileName" -encoding ASCII
-}
-
-
-#############################
-# WriteDotnetBindingEnvSetupBat
-# Write a batch file that sets the desired environment into
-# the user's current environment settings.
-#
-function WriteDotnetBindingEnvSetupBat
-{
- param
- (
- [string] $slnName,
- [string] $boostRoot,
- [string] $buildRoot,
- [string] $vsPlatform,
- [string] $nBits,
- [string] $outfileName
- )
-
- $out = @("@ECHO OFF
-REM
-REM Call this command procedure from a command prompt to set up a $vsPlatform ($nBits-bit)
-REM $slnName environment
-REM
-REM > call $outfileName
-REM >
-REM
-ECHO %PATH% | FINDSTR /I boost > NUL
-IF %ERRORLEVEL% EQU 0 ECHO WARNING: Boost is defined in your path multiple times!
-SET PATH=$boostRoot\lib;%PATH%
-SET QPID_BUILD_ROOT=$buildRoot
-ECHO Environment set for $slnName $vsPlatform $nBits-bit development.
-")
- Write-Host " $buildRoot\$outfileName"
- $out | Out-File "$buildRoot\$outfileName" -encoding ASCII
-}
-
-
-#############################
-# Main
-#############################
-#
-# curDir is qpid\cpp\bindings\qpid\dotnet.
-#
-[string] $curDir = Split-Path -parent $MyInvocation.MyCommand.Definition
-[string] $projRoot = Resolve-Path (Join-Path $curDir "..\..\..\..")
-[string] $cppDir = Resolve-Path (Join-Path $curDir "..\..\..")
-
-[System.Reflection.Assembly]::LoadWithPartialName("System.Windows.Forms") | Out-Null
-
-#############################
-# User dialog to get optional 32-bit boost and build paths
-#
-$boost32 = Select-Folder -message 'Select 32-bit BOOST_ROOT folder. Press CANCEL to skip 32-bit processing.'
-
-$defined32 = ($boost32 -ne $null) -and ($boost32 -ne '')
-if ($defined32) {
- $found = SanityCheckBoostPath $boost32
- if (! $found) {
- exit
- }
-}
-
-$make32 = $false
-if ($defined32) {
-
- $build32 = Select-Folder -message 'Select 32-bit QPID_BUILD_ROOT folder.' -path $projRoot
-
- $found = ($build32 -ne $null) -and ($build32 -ne '')
- if (! $found) {
- Write-Host "You must select a build root folder for 32-bit builds"
- exit
- }
- $found = SanityCheckBuildPath $build32
- if ($found) {
- Write-Host "Directory ""$build32"" is already set by CMake. CMake will not be re-run."
- } else {
- $make32 = AskYesOrNo "Run CMake in $build32 ?" "32-Bit Builds - Choose CMake run or not"
- }
-}
-
-#############################
-# User dialog to get optional 64-bit boost and build paths
-#
-$boost64 = Select-Folder -message 'Select 64-bit BOOST_ROOT folder. Press CANCEL to skip 64-bit processing.'
-
-$defined64 = ($boost64 -ne $null) -and ($boost64 -ne '')
-if ($defined64) {
- $found = SanityCheckBoostPath $boost64
- if (! $found) {
- exit
- }
-}
-
-$make64 = $false
-if ($defined64) {
- $build64 = Select-Folder -message 'Select 64-bit QPID_BUILD_ROOT folder.' -path $projRoot
-
- $found = ($build64 -ne $null) -and ($build64 -ne '')
- if (! $found) {
- Write-Host "You must select a build root folder for 64-bit builds"
- exit
- }
- $found = SanityCheckBuildPath $build64
- if ($found) {
- Write-Host "Directory ""$build64"" is already set by CMake. CMake will not be re-run."
- } else {
- $make64 = AskYesOrNo "Run CMake in $build64 ?" "64-Bit Builds - Choose CMake run or not"
- }
-}
-
-#############################
-# Conditionally run CMake
-#
-# 32-bit X86
-#
-if ($make32) {
- $env:BOOST_ROOT = "$boost32"
- cd "$build32"
- Write-Host "Running 32-bit CMake in $build32 ..."
- CMake -G "Visual Studio 9 2008" "-DCMAKE_INSTALL_PREFIX=install_x86" $cppDir
-} else {
- Write-Host "Skipped 32-bit CMake."
-}
-
-#
-# 64-bit X64
-#
-if ($make64) {
- $env:BOOST_ROOT = "$boost64"
- cd "$build64"
- Write-Host "Running 64-bit CMake in $build64"
- CMake -G "Visual Studio 9 2008 Win64" "-DCMAKE_INSTALL_PREFIX=install_x64" $cppDir
-} else {
- Write-Host "Skipped 64-bit CMake."
-}
-
-#############################
-# Emit scripts
-#
-# 32-bit scripts
-#
-if ($defined32) {
-
- Write-Host "Writing 32-bit scripts..."
-
- ###########
- # Powershell script to launch org.apache.qpid.messaging.sln
- #
- WriteDotnetBindingSlnLauncherPs1 -slnName "org.apache.qpid.messaging.sln" `
- -boostRoot "$boost32" `
- -buildRoot "$build32" `
- -cppDir "$cppDir" `
- -vsPlatform "x86" `
- -nBits "32" `
- -outfileName "start-devenv-messaging-x86-32bit.ps1"
-
-
- ###########
- # Batch script (that you doubleclick) to launch powershell script
- # that launches org.apache.qpid.messaging.sln.
- #
- WriteDotnetBindingSlnLauncherBat -slnName "org.apache.qpid.messaging.sln" `
- -buildRoot "$build32" `
- -vsPlatform "x86" `
- -nBits "32" `
- -psScriptName "start-devenv-messaging-x86-32bit.ps1" `
- -outfileName "start-devenv-messaging-x86-32bit.bat"
-
- ###########
- # Batch script (that you CALL from a command prompt)
- # to establish the org.apache.qpid.messaging.sln build environment.
- #
- WriteDotnetBindingEnvSetupBat -slnName "org.apache.qpid.messaging.sln" `
- -boostRoot "$boost32" `
- -buildRoot "$build32" `
- -vsPlatform "x86" `
- -nBits "32" `
- -outfileName "setenv-messaging-x86-32bit.bat"
-
-} else {
- Write-Host "Skipped writing 32-bit scripts."
-}
-
-#############################
-# 64-bit scripts
-#
-if ($defined64) {
-
- Write-Host "Writing 64-bit scripts..."
-
- ###########
- # Powershell script to launch org.apache.qpid.messaging.sln
- #
- WriteDotnetBindingSlnLauncherPs1 -slnName "org.apache.qpid.messaging.sln" `
- -boostRoot "$boost64" `
- -buildRoot "$build64" `
- -cppDir "$cppDir" `
- -vsPlatform "x64" `
- -nBits "64" `
- -outfileName "start-devenv-messaging-x64-64bit.ps1"
-
-
- ###########
- # Batch script (that you doubleclick) to launch powershell script
- # that launches org.apache.qpid.messaging.sln.
- #
- WriteDotnetBindingSlnLauncherBat -slnName "org.apache.qpid.messaging.sln" `
- -buildRoot "$build64" `
- -vsPlatform "x64" `
- -nBits "64" `
- -psScriptName "start-devenv-messaging-x64-64bit.ps1" `
- -outfileName "start-devenv-messaging-x64-64bit.bat"
-
- ###########
- # Batch script (that you CALL from a command prompt)
- # to establish the org.apache.qpid.messaging.sln build environment.
- #
- WriteDotnetBindingEnvSetupBat -slnName "org.apache.qpid.messaging.sln" `
- -boostRoot "$boost64" `
- -buildRoot "$build64" `
- -vsPlatform "x64" `
- -nBits "64" `
- -outfileName "setenv-messaging-x64-64bit.bat"
-
-} else {
- Write-Host "Skipped writing 64-bit scripts."
-}
|